User manual

CD Micro with DAB and Bluetooth

You’ll be up and running in no time

Getting to know your CD Micro with DAB and Bluetooth

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the

Troubleshooting

Mute

Press and release the ‘Mute’ button on the remote control to mute the sound. ‘MUTE ON’

will flash in the display.

Press and release the ‘Mute’ button again to turn this feature off and unmute the sound.

Equalizer or EQ setting

You can change the sound of your Micro using the EQ setting. There are 5 options

available (Flat, Classic, Rock, Pop and Jazz).

Press and release the ‘EQ’ button on the remote control to display and change the EQ

setting.

Headphone socket

You can connect headphones with a 3.5mm plug (not included) to the socket on the front

of the Micro. When you have headphones connected the Micro speakers are switched off

and all sound is via the headphones.

Note: Always keep the volume within reasonable limits.