User manual

Using your CD Micro with DAB and Bluetooth
Let’s get started
Using your CD Micro with DAB and Bluetooth
21
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
If you have moved your Micro to another location, e.g.: if you go on holiday, then it’s also
a good idea to carry out a manual scan.
In DAB mode:
Press and release the button on the Micro or the ‘Scan’ button on the remote control
to begin a search for stations. The display will change to ‘Scanning...’. A progress bar will
show the progress of the scan and the number of stations found during the scan will also
be displayed.
Prune DAB stations
You can remove the DAB stations in the station list that cannot be received in your area.
These are listed with a ‘?’ prefix.
1. Press and hold the ‘Menu’ button on the Micro or on the remote control. Use the
and buttons on the Micro or on the remote control to move to <Prune>. Press
the rotary control on the Micro to ‘Select’ or the ‘Select’ button on the remote control.
2. ‘Prune? Yes <No>’ is displayed. Use the button on the Micro or on the remote
control to move to ‘Yes’. Press the rotary control on the Micro to ‘Select’ or the ‘Select’
button on the remote control to prune the station list. Stations with a ‘?’ prefix will now
no longer be displayed. Press and release the ‘Menu’ button on the Micro or on the
remote control to exit the Menu.
Storing a DAB station preset
Your Micro can store up to 10 DAB radio stations in its preset memories for instant access
to your favourite stations.
1. Tune the Micro to the DAB radio station that you wish to preset.
2. Press and hold the button on the Micro or the ‘Prog.‘ button on the remote control
for approximately 2 seconds until ‘Preset store’ is displayed.
3. Use the and buttons on the Micro or on the remote control to move to the
preset location that you would like to store the radio station to (1-10).