User manual

Using your CD Micro with DAB and Bluetooth
Let’s get started
Using your CD Micro with DAB and Bluetooth
22
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
4. Press the rotary control on the Micro to ‘Select’ or the ‘Select’ button on the remote
control. The display will confirm ‘Preset X stored’, where ‘X’ is the number of the preset
(1-10).
Note: If there is already an existing DAB station stored under a preset, it will be
overwritten when you store the new station.
Tune to a DAB station preset
In DAB mode:
1. Press and release the button on the Micro or the ‘Prog.‘ button on the remote
control. ‘Preset Recall’ is displayed together with the number of the current preset
location.
2. Use the and buttons on the Micro or on the remote control to move to the
Preset location and station that you would like to listen to (1-10).
3. Press the rotary control on the Micro to ‘Select’ or the ‘Select’ button on the remote
control. The Micro will instantly tune to that station and begin to play.
Note: If no DAB station has been stored under the preset button, ‘Preset Empty’ will be
displayed, then the Micro will revert to the previously selected radio station.
DAB display information
When listening to a DAB station you can change the information that will appear
on the display. There are several different types of information that are sent by the
broadcaster.
• Dynamic Label Segment (DLS)
This is scrolling text information supplied by the broadcaster. Information could be the
name of an artist or music title, DJ’s name, contact details for the radio station etc.