User manual

Using your CD Micro with DAB and Bluetooth
Let’s get started
Using your CD Micro with DAB and Bluetooth
26
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Changing the scan setting
In FM mode:
1. Press and hold the ‘Menu’ button on the Micro or on the remote control.
<Scan setting> is displayed. Press the rotary control on the Micro to ‘Select’ or the
‘Select’ button on the remote control.
There are now two different options to choose from and the current setting will have
an ‘*’ next to it.
• All stations
The scan will stop for every station it receives, even if the signal strength is poor.
• Strong stations
The scan will only stop when a strong signal strength is received which should also
result in a better audio quality.
It is possible that the station you are scanning for may be missed using this option.
2. Use the and buttons on the Micro or on the remote control to move to
and choose from the two options available. Press the rotary control on the Micro to
‘Select’ or the ‘Select’ button on the remote control to confirm.
3. Press and release the ‘Menu’ button to exit the Menu.
Audio mode
The radio will automatically switch between Stereo and Mono, depending on the quality
of the signal being received but you can override this function and manually switch
between ‘Stereo’ and ‘Mono’.
Note: You may wish to select ‘Stereo’ if you are listening to your Micro using
headphones.
1. Press and hold the ‘Menu’ button on the Micro or on the remote control.
2. Use the and buttons on the Micro or on the remote control to move to
<Audio setting>. Press the rotary control on the Micro to ‘Select’ or the ‘Select’ button
on the remote control.