User manual

Using your CD Micro with DAB and Bluetooth

Let’s get started

Using your CD Micro with DAB and Bluetooth

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the

Troubleshooting

3. Press the rotary control on the Micro to ‘Select’ or the ‘Select’ button on the remote

control. The Micro will tune to that station and begin to play.

Note: If no FM station has been stored under the preset button, ‘Preset Empty’ will be

displayed, then the Micro will revert to the previously selected radio station after a few

seconds.

FM display information

When listening to an FM station you can change the information that will appear on the

second line of the display. There are several different types of information that are sent by

the broadcaster.

• Radiotext (RT)

This is scrolling text information supplied by the broadcaster. Information could be the

name of an artist or music title, DJ’s name, contact details for the radio station etc.

• Program Type (PTY)

Such as ‘Rock’, ‘Pop‘, Talk’ or ‘News’

• Station name or frequency

Such as BBC R4 or 92-95MHz

• Audio mode

Stereo or Mono.

Note: The radio will automatically switch between Stereo and Mono, depending on

the quality of the signal being received but you can override this function and manually

switch between ‘Stereo’ and ‘Mono’. Please refer to ‘Audio Mode’ on page 26.

1. Repeatedly press and release the ‘Menu’ button on the Micro or on the remote control

to cycle through the different information options.