User manual

Using your CD Micro with DAB and Bluetooth
Let’s get started
Using your CD Micro with DAB and Bluetooth
31
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
In CD mode, with the CD you wish to programme in the CD compartment and stopped:
1. Press and release the ‘Menu’ button on the Micro or press and release the ‘Prog.’
button on the remote control to enter CD programmed play mode. ‘P01 00’ will be
displayed.
2. Use the or buttons on the Micro or on the remote control to go to the track
number that you would like to program to play first. Press and release the ‘Menu’
button on the Micro or the ‘Prog.’ button on the remote control to confirm.
3. ‘P02 00’ will now be displayed and you can select the second track that you would
like to programme. Continue to select each track as in Step 2 above, up to a total of 20
tracks. Press and release the ‘Menu” button on the Micro or the ‘Prog.’ button on the
remote control again to confirm the last track in the programmed play mode list.
4. Press and release the button on the Micro or on the remote control to play the
programmed tracks.
5. To exit programmed play mode, press and release the button on the Micro or on
the remote control.
Repeat and Random modes
Press and release the ‘Repeat’ button on the remote control. ‘RP1’ is displayed.
Continuously press and release the ‘Repeat’ button to cycle through the available options
of :
• ‘Repeat’ (current track) ‘RP1’ is displayed.
• ‘Repeat all’ (all the tracks on the CD) ‘ALL’ is displayed.
• ‘Random’ (random play order) ‘RDM’ is displayed.
Press and release the ‘Repeat’ button one more time to turn off Repeat and Random
modes.