User manual

Using your CD Micro with DAB and Bluetooth
Let’s get started
Using your CD Micro with DAB and Bluetooth
33
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Bluetooth mode
Check that your Micro is in Bluetooth (BT) mode. If you are not already in BT mode, briefly
press and release the ‘Mode’ button on the front of the Micro or on the remote control,
until you are in BT mode (check the display). ‘Searching’ will be displayed. If a device has
not been ‘paired’ or connected with your Micro ‘Searching’ will continue to be displayed.
If you have previously ‘paired’ or connected a device with your Micro, after a few seconds
‘Connected’ will be displayed.
Connecting or ‘Pairing’ with your Micro
In Bluetooth (BT) Mode:
1. ‘Searching’ will be displayed.
2. On the device that you would like to connect to your Micro via Bluetooth (e.g. iPhone/
iPad/Android/other phone/Tablet/Computer), turn on Bluetooth connectivity and
ensure that it is ‘discoverable’.
Note: If necessary, refer to the instructions for your device to add or set up Bluetooth.
3. Select to ‘Add new device’, if necessary.
Note: Some products will automatically search for a new device and so the ‘Add new
device’ option is not available.
4. When found, your Micro will be displayed as ‘BUSH DAB Micro’. Select the device
name to begin pairing.
5. When pairing is complete ‘Connected’ will be displayed.
6. Now that you have paired your device with the Micro, it will connect to it when it is
within range, which is about 10 metres or less (33 feet or less), line of sight.
7. Your device will remain paired with the Micro unless you decide to disconnect or
‘unpair’ it.