Digital Photo Frame Operating Manual DPF801/DPF1001
TABLE OF CONTENTS TABLE OF CONTENTS 1.Connection 2.Supported Interfaces 1-2 3 3 3.Illustration of button layout on the remote control 4-5 4.System Settings 6-8 4.1 Photo Setting 6 4.1.1 Interval Time 6 4.1.2 Transition Effect 6 4.1.3 Show Type 6 4.1.4 Slide Mode 6 4.1.5 Browse 6 4.1.4 Auto Play 7 4.2 Display Setup 7 4.2.1 Brightness 7 4.2.2 Contrast 7 4.2.3 TFT Brightness 7 4.2.4 TFT Contrast 7 4.2.5 TFT Saturation 8 4.3 Custom Setup 8 4.3.1 OSD Language 8 4.3.
TABLE OF CONTENTS 10.3 Exit 11.Alarm 12 13 11.1 Enable 13 11.2 Set Time 13 11.3 Exit 12.Auto-Power 13 13-14 12.1 Power On Enable 13 12.2 Power off Enable 13 12.3 Set Time 14 12.4 Exit 13.Edit 14 14-17 13.1 Select Source 14 13.2Copy 15 13.3 Delete 15 13.4 New Folder 16 13.5 Format Photo Frame 17 14.Ebook 15.Basic Operations 17 17-23 15.1 STANDBY: Turn on the photo frame or turn it to stand-by mode 17 15.2 Function: main menu 17 15.
1 Connection Connect the DC plug of the AC-DC power adapter to the DC IN (9V) socket at the back of the photo frame. Connect the power adaptor to a AC 230/240V mains socket. Caution: Only connect the mains adapter to a properly installed wall socket with a voltage matching to the"Technical data" of the mains adapter. Using an incorrect adaptor could damage your photo frame or adaptor.
3 Illustration of button layout on the remote control 3.1 Top side appearances : PLAY/PAUSE button, use this button to start playback, pause or resume playback.This button also use as ENTER in menus and in File manger. 1 7 6 5 4 3 2 1 2 : PREVIOUS button, use this button to skip to last photo, song or video or scroll up when reading eBook.Press this button to move cursor up in File Manager. 3 : NEXT button, use this button to skip to next photo, song or video or scroll down when reading eBook.
3 Illustration of button layout on the remote control 3.4 Remote controller instruction 1 STANDBY: Press this button, to enter into STANDBY mode or start up from standby mode. 2 FILE: Press this button, to read ebook. 3 PHOTO+ MUSIC: Press this button, to play photo+music. 4 PHOTO: Press this button, to view photo. 5 VOL-: Press this button, to turn down volume. 6 VOL+: Press this button, to turn up volume. 7 CALENDAR: Press this button, to show real time and date.
4 System Settings To power on the photo frame, set the POWER switch to ON position. The following operations are using remote control. Select[Setup] from the main menu, press the ENTER button or press the SETUP button in any other mode to enter setup mode. Below illustration shows the screen of the setup menu. Use navigation buttons to select decided item followed by ENTER button. Use button to select between options then press ENTER to confirm.
4 System Settings File Manager mode: File Number:9-111 /dev/usb0/1 Beauty MP3 200601-1 9 200601-2 10 200601-3 11 BMP Video 450x676 2008/3/29 4.1.4 Auto Play 4.1.4.1Photo Slide show will be automatically started if auto-play for photo is set to on when Photo is selected in Main menu or PHOTO button is pressed. Either Thumbnail mode or File Manager will be display if auto-play for photo is set to off. 4.1.4.
4 System Settings 4.2.5 TFT Saturation This option can be used to set the saturation of the display. The saturation is divided into 15 levels, from -7~0~7, with larger numbers representing a higher degree of saturation. Setup Menu Brightness Contrast TFT Brightness TFT Contrast TFT Saturation :Select Display Setup -4 -3 -2 -1 0 :Confirm 4.3 Custom Setup 4.3.1 OSD Language This option can be used to set the language for the OSD (on screen display). The user can choose from: English. 4.3.
5 Photo Thumbrianll Mode File Number:9-111 Page:1/24 /dev/usb0/1 Beauty MP3 200601-1 9 200601-2 10 200601-3 11 BMP Video 450x676 2008/3/29 427x640 2006/02/24 Rotate Slide Show 6 Music After choosing [Music] from the main menu, press the ENTER key, and the system will automatically playback found audio file stored in external storage device (SD/MMC, USB, CF) or internal memory. If no supported file found, "No Playable File" will be appears on the display then return to Main menu.
8 Movie After choosing [Movie] from the main menu, press the ENTER key, and the system will automatically playback found video file stored in external storage device (SD/MMC, USB, CF) or internal memory. If no supported file found, "No Playable File" will be appears on the display then return to Main menu.
9 Calendar 9.1 Display This option provides the [Calendar]display function. The date displayed in the calendar is the current date set in the system. 2008.4.7 Sun Mon Tue Wed Thu Fri Sat 1 2 3 4 In addition to displaying the current date, the user can use the keys to browse different months, or use the keys to browse different years. 2009.4.
10 Clock Select [Analog Clock], and press the ENTER key. 11 12 1 1 2 3 4 6 7 8 9 10 11 12 14 15 16 17 18 19 24 25 26 20 21 22 23 28 29 30 3 9 4 8 7 6 5 10.2 Set Time This function allows the user to set the system time. Use buttons to move between Hour, Minute and second.Use buttons to set Hour, Minute and second.After the time is set, use buttons to select OK then press ENTER button to confirm or select Cancel then press ENTER button to quit.
11 Alarm After selecting [Alarm] from the main menu, press theENTER button, and the system will enter the alarm settings mode. 11.1 Enable This function allows users to activate(On) or de-activate(Off) the alarm. 11.2 Set Time This function allows users to set the alarm time. When the alarm function has been activated, a prompt will Appear. Use buttons to move between Hour and Minute. Use buttons to set Hour and Minute.
12 Auto-Power 12.3 Set Time This function allows users to set the automatic power-on/power-off times. The user can choose to set the [Power-on]time or the [Power-off]time. Use buttons to select Power On or Power Off then press ENTER button. Use buttons to move between Hour and Minute. Use buttons to set Hour and Minute. After the Power On time or Power Off time is set, use buttons to select OK then press ENTER button to confirm or select Cancel then press ENTER button to quit.
13 Edit 13.2Copy To copy a file, select the source file as described in page 14. Press button to select Edit then press ENTER button. Use buttons to select Copy then press ENTER button. Use NAVIGATION buttons to select decided location / folder then press ENTER button. Use button to select Edit again then press ENTER button. Use buttons to select Paste then press ENTER button to start copy. After the file is copied, will return to File Manger.
13 Edit IMAGE01 1 IMAGE02 Delete File 2 IMAGE03 3 /Dev/nand1/1 IMAGE01 1 /Dev/nand1/1 /dev/usb0/1 IMAGE02 2 /dev/usb0/1 IMAGE03 3 Delete Please wait...4555555222 4 Delete the files4555555222 •• 4 063% 4422255555 5 4422255555 5 Yes No 2/3 4425555555 6 4425555555 6 Edit Edit 13.4 New Folder This function allows users to create a new folder in the device you selected. To add a new folder, use NAVIGATION buttons to select decided location then press ENTER button.
13 Edit 13.5 Format Photo Frame This function allows users to format Nand. In File Manager, use buttons to select Edit the press ENTER button. Use buttons to select Format Photo Frame then press ENTER button to start. When format completed, will return to File Manager. /Dev/nand1/1 200502052556 1 /Dev/nand1/1 200502052556 1 /dev/usb0/1 200502052547 2 /dev/usb0/1 200502052547 2 Format Photo Frame 200502052457 3 200502052457 3 New Folder Format Photo Frame Return 640x480 2008/4/29 Please wait..
15 Basic Operations 15.3 Basic Playback Functions STOP: When the system is playing, pressing STOP will stop the playback. If you were displaying images, then you will enter Thumbnail mode or File Management mode; if you were playing a movie, then the movie will cease playing and you will enter the File Management mode. PLAY/PAUSE: If you wish to pause during playback, you can press PLAY/PAUSE . If you are playing images, pressing PLAY/PAUSE will cause the images to stop playing.
15 Basic Operations Photo/41 14/14 The second time you press DISPLAY , the following information will be dis played:[resolution], [date]. Resolution:800x600 Date:2003/5/6 The third time you press DISPLAY , you will go back to the original display, and no information will be displayed.
15 Basic Operations MUTE: Press MUTE once and the system will mute, press it again and sound will be restored. Rotate JPG Images: By pressing the button on the remote control ,you can rotate JPG images 90 degrees to the left (counter-clockwise) By pressing the button on the remote control, you can rotate the image 90 degrees to the right (clockwise) By pressing the button on the remote control ,you can flip the image horizontally, reversing the left and right sides of the image.
15 Basic Operations The up button on the remote control can be used to [flip horizontally], resulting in an image with left and right sides reversed. As shown in the figure below, the front of the car switches from to , and the entire image has been reversed from left to right, but the vertical sides do not change, the top of the car is still on top.
• • • • •• • •
