Instruction Manual

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the

Troubleshooting

Getting to know your Bluetooth speaker

You’ll be up and running in no time

Positioning the Bluetooth speaker

It is important that you consider carefully in advance where your Bluetooth Speaker will be

situated and make sure that it is:

• on a flat and stable surface.

• at least 1 metre away from other electrical appliances to avoid interference.

• where it will be in range of the connected or ‘paired’ bluetooth device (e.g. iPod/

iPhone/iPad/Android/other phone/computer, which is about 10 metres or less (33 feet

or less) in line of sight.

• Never place your Bluetooth Speaker directly onto antique or polished surfaces.

Power connection

1. Connect the micro USB end of the charging cable (supplied) to the USB socket under

the rubber cover on the back of the Bluetooth speaker. Plug the standard end of the

USB charging cable into a computer or other USB charging device.

2. The red battery charging LED on the top of the Bluetooth speaker will light up, to

indicate that the battery is charging. When the battery is fully charged the red LED will

turn off.

3. Note: It will take approximately 2.5 hours to fully charge your Bluetooth Speaker,

before first use.

4. When fully charged, unplug the micro USB charging cable.

Note: Your Bluetooth speaker has an approximate play time of 5 hours, before it needs

to be recharged. When the battery power is low, you will hear an audible alert every 5

seconds. You should plug in and recharge your Bluetooth speaker straight away.