Instruction Manual

19
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Using your Bluetooth speaker
Using your Bluetooth speaker
Let’s get started
Note: If you were listening to music when you receive or make a call, the music will be
paused whilst the call is in progress and will resume once the call ends.
Aux in mode
1. Connect one end of a 3.5mm audio cable (not supplied) to the headphone (or
auxiliary out) socket of your secondary device. Connect the other end to the Aux in
socket under the rubber cover on the back of your Bluetooth speaker. This will switch
your bluetooth speaker to Aux in mode.
2. Press the Play button on your external device to start playback through the Bluetooth
speaker.
3. To gain optimal volume levels, adjust the volume level on both the secondary device
and on the Bluetooth speaker.
Note: After you have finished listening to your external device you must unplug the
audio cable from the Aux in socket, to be able to use it as a Bluetooth speaker again.