HERITAGE Introduction and Contents Thank you for buying this Bush product, which is designed to give you many years of trouble-free service. You may already be familiar with using a similar unit, but please take time to read these instructions. They are designed to familiarise you with the unit’s many features and to ensure you get the very best from your purchase. Safety is important Your safety and the safety of others are important.
HERITAGE Safety Instructions Ensure that you read all of the safety instructions before using this unit. Safety Considerations Position the power cable and other connected cables so that they are not likely to be walked on, pinched or where items can be placed on or against them. Do not use the unit in humid or damp conditions. Do not allow the unit to get wet. Never allow children to insert foreign objects into holes or slots on the unit.
HERITAGE Your DAB+ Radio 1. Mode button Press to switch among DAB, FM, AUX in and Bluetooth mode. 2. Info button Press to view station information. 7. Sleep button Press to set up sleep time. 8. Alarm button Press to set up alarm 9. Volume/Standby knob Press to switch on radio, press again to switch radio to standby mode. Turn to adjust volume. 3. Scan button Press to scan DAB and FM stations. 4. Menu button Press to display menu options. 10. Tune/Select knob Turn to tune and press to confirm. 5.
HERITAGE What is DAB+ DAB+ was developed in Europe by a consortium of broadcasters and manufacturers. DAB+ uses digital compression techniques to transform the source material, i.e. music and speech, into better quality audio. Interference free reception Analogue systems suffer from an effect called “multipath distortion”. This is caused because waves do not behave in an orderly fashion, but bounce and reflect off buildings etc.
HERITAGE Getting Started Carefully remove your DAB+ Digital Radio from the box. You may wish to store the packaging for future use. In the Box Inside the box you will find: DAB+ Radio (Main Unit) Power Adapter User Guide Positioning your DAB+ Radio Place your DAB+ Digital Radio on a flat / stable surface that is not subject to vibrations. Avoid the following locations: Where the radio will be exposed to direct sunlight. Where the radio will be close to heat radiating sources.
HERITAGE DAB+ Operation # Note: When you turn on the radio it will automatically search and store all the available stations. You should conduct an additional Full Scan to ensure all stations are picked up and stored. It is also recommended every few months to run a new scan to pick up any new DAB+ that may have begun broadcasting after purchasing your DAB+ radio. For initial use, your radio will conduct a full scan store all DAB+ radio stations possibly it can detected.
HERITAGE Using DAB+ Radio Manual Scan 1. Press Menu button ÆTurn the Tune/Select knob to Manual scan Æ Press the Tune/Select knob to confirm, the display will show the channel number and frequency as below 2. Turn the Tune/Select knob to step between the channels and then press the Tune/Select knob select the current channel.
HERITAGE Using Presets Setting Station Presets # Note: This is the same for DAB+ and FM Radio stations. Your radio can store 10 DAB+ & 10 FM station presets. Make sure that you are not in the menu when you are attempting to set a preset. The way of storing current playing station as a preset: 1. Press and hold the Preset button until it shows as below: 2. Turn the Tune/Select knob to cycle through the preset stations store numbers 1-10. 3.
HERITAGE Using FM 1. Press the Mode button to switch to FM Mode from DAB+ Mode. 2. Once in FM mode, it will start at the beginning of the FM frequency range (87.50MHz) or it will play the last FM station you were listening to. 3. To manually change the FM frequency, make sure no other order/system setting is going on, turn the Tune/Select knob to change the frequency by 0.05MHz. 4.
HERITAGE Using Aux in AUX IN allows for quick and easy connection to an MP3 player or other external audio sources. 1. 2. 3. Before connecting to the mains socket, use a 3.5mm audio cable (not supplied) to connect to your external audio device through the Aux in socket on the rear of unit. Connect power adapter to mains socket, press Volume/Standby knob to switch unit on. Press Mode button repeatedly to select Auxiliary Input mode. 4. 5.
HERITAGE Basic Operation Set Sleep Time This function enables your unit to switch to standby mode by itself after a set sleep time 1. Press Menu button Æ Turn the Tune/Select knob to the Sleep menu Æ Press the Tune/Select knob to confirm. 2. Turn the Tune/Select knob to view options Sleep Off, 15, 30, 45, 60 or 90 minutes, press the Tune/Select knob to confirm. 3. To view the set sleep time, redo above step 1. 4.
HERITAGE Basic Operation Factory Reset A factory reset resets all user settings to default values, so time/date and presets are lost. It can be reached via press the Menu button Æ Turn the Tune/Select knob to the Factory Reset menu Æ Turn the Tune/Select knob to ‘YES’Æ Press the Tune/Select knob to confirm. Get SW Version Press Menu button Æ Turn the Tune/Select knob to the SW version menu Æ Press Tune/Select knob to confirm. The software version will show on the display.
HERITAGE Troubleshooting and Technical Specification Troubleshooting If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult you retailer or service professional. WARNING: Under no circumstances should you try to repair the set yourself, as this would invalidate the warranty.
HERITAGE Warranty Please keep your receipt as proof of purchase. This product is warranted for any defect in materials or workmanship for 12 months years after the original date of purchase. This product is for normal domestic and office use only. This warranty does not cover damage from misuse or neglect , accidental damage, vermin infestation, excessive voltages such us lightning or power surges or any alternation that affects the performance or reliability of the product.