INSTRUCTION MANUAL High Definition Digital Set Top Box with DAB+ Receiver DFTA52DAB The Gold Technical Support Line: 1902 215 259 (Charges will apply at $2.
Introduction Thank you for buying this Bush product, which is designed to give you many years of trouble-free service. You may already be familiar with using a similar unit, but please take time to read these instructions. They are designed to familiarise you with the unit’s many features and to ensure you get the very best from your purchase. Safety is important Your safety and the safety of others is important. Please therefore, ensure you read the “Safety Instructions” before you operate this unit.
Table of Contents Introduction……………………………………………… 1 Table of Contents………………………………………… 2-3 Safety Instructions……………………………………… 4 About the Set Top Box………………………………… 5 Front Panel and Rear Panel…………………………… 6 Front Panel …………………………………………… 6 Rear Panel…………………………………………… 6 Remote Control…………………………………………… 7 Installing the Batteries…………………………………… 8 Connecting to Equipments……………………………… 9-11 First Time Installation…………………………………… 12 Basic Operation of DVB………………………………… 13-14 DVB Main Menu………………………………………… 15 Program Edit……
Table of Contents User Preferences for DVB….…………………………… 22 22 Volume Bar Time Out...……………………………… Parental Control……………………………………… 22-23 DAB Main Menu………………………………………… 24 Operation of DAB……………………………………….
Safety Instructions • • • • • • Please read the safety instructions carefully Please keep this instruction manual for future reference Please keep this Set Top Box away from humid conditions Place this Set Top Box on a reliable flat surface before setting it up Do not place it on soft furnishings If any of the following situations arise, contact the Bush Service and Warranty technicians: - If the Set Top Box has been exposed to any liquids or moisture - If the Set Top Box has been damaged in any way - If t
About the Set-Top-Box This High Definition Digital Set Top Box with DAB+ Set Top Box allows you to access all High Definition Digital TV channels and DAB+ Digital Radio stations. Its digital reception covers VHF & UHF bands. Digital TV eliminates noise and interference and offers high quality video and audio. An easy to use on-screen installation guide is provided. In addition, a fully featured remote control is included that offers you access to every feature with a simple press of a button.
Front Panel and Back Panel Front Panel 1. POWER Button: Press the Power Button to switch the unit on or off. 2. MENU Button: Press the Menu Button to enter the Main Menu. 3. OK Button: Press the OK button to confirm and menu or setting selections. 4. ▲,▼Button: Press the Up and Down Buttons to scroll through the channels and settings. 5. ◀,▶ Button: Press the Left and Right Buttons to change the volume level. Back Panel 1. ANT IN: Ant In is where you connect your TV Antenna 2.
Remote Control 1. Power Button: Press the Power Button to switch the TV on or off. 2. Numeric Buttons: Press the Numeric Buttons to select a channel or select a page in the Teletext. 3. INFO Button: Press the INFO Button to view the 4. FAV Button: Press the FAV Button to display the 5. VOL+/- Button: Press the VOL+/- Button to 6. ▲,▼ Button: Press the Up and Down Buttons to 7. Menu Button: Press the Menu to view the Main 8.
Installing the Batteries Remove the battery cover from the remote control and put two AAA size batteries inside the compartment. The diagram below shows the correct way to install the batteries. Caution: 1. Keep the batteries out of the reach of children. 2. Don’t attempt to recharge, short-circuit, disassemble, heat up or throw batteries into a fire. 3. Always replace both batteries at the same time. Never mix new and old batteries or batteries of a different type. 4.
Connecting to Equipments How to get good reception • You do not need to change or replace your existing TV Antenna to receive digital reception. However if your antenna is not in good condition it is recommended that you consider replacing it to ensure uninterrupted digital television viewing. • Viewers in areas of poor analog reception may need specialists’ advice about antenna requirements for digital reception in their area.
Connecting to Equipments Connect your Set Top Box via Component (YPbPr Output and Audio Output) Connect your Set Top Box via VGA Output and Audio Output 10
Connecting to Equipments Connect your Set Top Box via HDMI Output Connect your Set Top Box via Optical/Mixed Audio L/R Output 11
First Time Installation Note: Be sure to turn on the main power at the front of your Set Top Box before operating. After all the connections have been made, turn on your TV. Make sure that the Set Top Box is connected to the main power and switched on. If you are using the Set Top Box for the first time or have conducted a factory reset, a First Time Installation guide will be displayed to assist you in setting up your Set Top Box correctly. Follow the prompts as requested.
Basic Operations of DVB Changing Channels 1. Press the NUMERIC Buttons (0~9) on the remote control to select the channel number you wish to watch. 2. Press the ▲, ▼ Buttons on the remote control or the front panel to scroll through the available channels. 3. Press the SWAP Button to select the previous channel played. Volume Control Press the ◀, ▶ Buttons on the remote control or on the front panel to adjust the volume. The following volume bar will appear on your screen. Mute 1.
Basic Operations of DVB To view the program information 1. Press the INFO Button to view the detailed information of current program. 2. Press the INFO/ EXIT to exit this information menu. Subtitles Press the SUB Button to turn on or off the subtitles. Teletext Menu 1. Press the TXT Button to open the Teletext Menu. 2. Press the EXIT Button to close the Teletext Menu. To view the program signal information 1. Press the INFO Button to view the signal level and quality of the current program. 2.
DVB Main Menu Set Top Box Menu Tree This section guides you through all of the options in the Main Menu. The Main Menu is divided into 3 sections. Main Menu 1. Press the MENU Button to bring up the Main Menu or return to previous Menu. 2. Press the ▲▼ Buttons to move up/down the sub menu. 3. Press the OK Button to enter into the sub menu you select. 4. Press the EXIT Button to exit the menu.
Program Edit TV Program Edit 1. Press the MENU Button and then select the Setting Sub-Menu and select Program Edit. 2. Press the ▲▼ Buttons to scroll through the options. 3. Press the RED Button to add a program to your favorites list. The FAV icon will appear next to the program. 4. Press the RED Button again to cancel and the FAV icon will disappear. 5. Press the EXIT Button to exit all menus or press the MENU Button to return to the previous menu. Lock Program 1.
Live TV & Electronic Program Guide (EPG) Live TV 1. Press the Menu Button to select the Live TV Menu and then select Channel list and TV option. 2. Press the ▲▼ Buttons to select the program you like. 3. Press the EXIT Button to exit all menus. EPG (Electronic Program Guide) 1. Press the EPG Button to view the EPG information. 2. Press the ▲▼ Buttons to view the event information such as event name and time. 3. Press the OK Button to view brief information of the current event. 4.
Setting for DVB Installation Auto Scan 1. Press the MENU Button to select the Main Menu and then select Settings, Installation and then DVB. 2. Press the RED Button select and begin the Auto Scan for all new channels. 3. Press the EXIT Button if you wish to stop the Auto Scan. Manual Scan 1. Press the MENU Button to select the Main Menu and then select Settings, Installation and then DVB. 2. Press the ▲▼ Buttons to select the channels you wish to scan for specifically.
System Setup of DVB A/V Output Settings 1. Press the Menu Button to enter the Main Menu and then select the Setting, System Setup and finally A/V Output Setting. 2. Press the ▲▼ Buttons to scroll through and select the required options of; Video Resolution, Display Aspect Ratio, Aspect Ratio, Conversion, Audio SPDIF, TTX Type and AV Settings. 3. Press the EXIT Button to exit all menus.
System Setup of DVB TV/Radio Timer 1. Press the Menu Button to enter the Main Menu and then select the Setting, System Setup, TV/Radio and Timer List. 2. Press the ▲▼ Buttons to select the program. 3. Press the GREEN Button to mark the program, a check icon “√” will appear. Press the GREEN Button again to cancel this operation, the icon will disappear. 4. Press the YELLOW Button to delete the program. 5. Press the EXIT Button to exit all menus or press the MENU Button to return to the previous menu.
System Setup & User Preferences of DVB Factory Default 1. Press the Menu Button to enter the Main Menu and then select the Setting, System Setup and then Factory Default. 2. Press the OK Button and enter the correct the PIN code and press the OK Button again to confirm your selection, the factory default data will be loaded and begin to reset your Set Top Box Settings. All setting will be cleared. NOTE: Factory default PIN is “0000”.
User Preferences of DVB Volume Bar Time Out 1. Press the Menu Button to enter the Main Menu and then select the Setting, User Preferences and then Volume Bar Time Out. 2. Press the ▲▼ Buttons to select the Volume Bar Time Out option. Press the OK Button to enter the submenu. 3. Press the ▲▼ Buttons to select the timeout that you desire (4 timeout modes are available: 1 second, 3 second, 5 second, 10 second) and press the OK Button to confirm. 4.
User Preferences of DVB 4. System Setup Menu In the parental control menu you are able to lock/unlock the System Setup Menu 5. User Preferences Menu In the parental control menu you are able to lock/unlock the User Preference Menu. 6. Change Password Select change password to modify the Set Top Boxes password. Follow the prompts of the pop-up menu. NOTE: Factory default password is “0000”. If you forgot your password, please the override code is 7710, this will unlock any password protected area.
DAB+ Main Menu DAB+ Menu Tree This section guides you through all of the options in the DAB+ Main Menu. The Main Menu is divided into 3 sections. DAB+ Main Menu 1. Press the MENU Button to bring up the Main Menu or return to previous Menu. 2. Press the ◀▶ Buttons to move up/down the submenu. 3. Press the OK Button to enter into the submenu you select. 4. Press the EXIT Button to exit the menu.
Operations of DAB+ Select DAB+ Function 1. Press the TV/DAB Button to switch to DAB+ Mode. 2. Press the OK Button to enter the DAB+ mode. Press the ▲▼ Buttons to select the station you desire. Channel Scan Auto Scan 1. Press the Menu Button to enter the Main Menu and then select the Setting, Installation and then DAB+. 2. Press the OK Button to confirm. 3. Press the RED Button to starting scanning the station. Manual Scan 1.
Operations of DAB+ Viewing Station List 1. Press the Menu Button to enter the Main Menu and then select the Live TV, Channel list and then Radio. 2. Press the ▲▼ Buttons to select the program you desired. 3. Press the EXIT Button to exit all menus. Program List 1. Press the TV/DAB+ Button to select DAB+ mode. 2. Press the OK Button and the DAB+ List will be displayed. 3. Press the ▲▼ Buttons to select the program you desired. 4. Press the ◀▶ Buttons to adjust the volume. 3.
Operations of FM Select FM Function 1. Press the TV/DAB Button to select the FM option. 2. Press the OK Button to enter FM mode. Press the ▲▼ Buttons to manual tune frequency to obtain the optimum reception. 3. Press the ◀▶ Buttons to auto search station, and the strongest singal will automatically playback if found. Note: 1. EPG (Electronic Program Guide) & Program Edit is only function in DVB section only. 2. The operation of System Setup, User Preferences and Parental Control are same as DVB Section.
Troubleshooting If you have any issues or queries about the functions of this Set Top Box, please check the below table as we have provided you with FAQs to assist with any issues. If this table is not of assistance, please contact the Bush warranty line.
Technical specifications It em Tuner Frequency Range Demodulation Connectors Power supply Display Decoding Others Input Impedance Signal Input Level Bandwidth Demodulator OFDM Modulation Packed Carries Guard Interval RF IN RF Loop Through Y, Pb/Cb, Pr/Cr L/R Optical HDMI RS-232 VGA Input Consumption Resolution Aspect Ratio Video Audio Compliance Sound Mode Size Weight (Net) Sp ec i f i c at i o n VHF: 51MHz to 400MHz UHF: 448MHz to 858MHz 75Ohms unbalanced -78~-25dbm 7MHz COFDM 2K, 8K FFT, SFN and MF
Warranty Please keep your receipt as proof of purchase. This product is warranted for any defect in materials or workmanship for one year after the original date of purchase. This product is for normal domestic and office use only. This warranty does not cover damage from misuse or neglect, accidental damage, vermin infestation, excessive voltages such us lightning or power surges or any alternation that affects the performance or reliability of the product.
PO BOX 6287 Silverwater NSW 1811 www.bushaustralia.com.au rev.
