Instruction manual Ceramic Hob LSBCHP
You’ll soon be enjoying your new Ceramic Hob It all begins here, with your instructions. Don’t worry, there’s nothing too technical coming up. Just simple, step-by-step guidance to get you up and running quickly. Sound good? Then let’s get started. Help and Guidance We’re here to help you get the most from your Ceramic Hob. Should you require any guidance, a simple solution can often be found online at: www.bush-support.com If you still require further assistance, call one of our experts on 01759 487838.
Contents 5 1 Care and Maintenance 6 2 3 24 25 Getting to know your Hob Overview 11 Accessories 12 6 Product support Troubleshooting 28 Help and assistance 29 Declaration of conformance to Installing your Hob product standards 30 14 Disposal 30 15 Guarantee 31 16 4 Using your Hob 18 19 Timer 20 Cooking tips 21 or online at www.bush-support.
Safety information 1
Safety information Important - Please read these instructions fully before installing or operating INSTALLATION WARNINGS DURING USAGE IMPORTANT: Prior to Installation ensure that the local supply conditions (electricity voltage and frequency) are compatible with the requirements of your Ceramic hob.
Safety information Important - Please read these instructions fully before installing or operating IMPORTANT: If you do not intend to use your hob for a long period of time turn off the electric supply to the cooker. GENERAL SAFETY WARNINGS IMPORTANT: This appliance has been designed for non-professional, domestic use only. Do not use this cooker for commercial use or any other application e.g. room heating.
Getting to know your Ceramic Hob 2
Getting to know your Ceramic Hob You’ll be up and running in no time Ready? Let’s begin... Please read these instructions carefully. They contain important information which will help you get the best from your ceramic Hob and ensure safe and correct installation and operation. If you require any further assistance, our technical experts are happy to help. For full details, refer to the product support section at the end of these instructions.
Getting to know your Ceramic Hob You’ll be up and running in no time Overview C A. Single cooking zone 1200W B. Single cooking zone 1800W C. Sensor touch control or online at www.bush-support.
Getting to know your Ceramic Hob You’ll be up and running in no time Accessories 2 1 3 1. Bracket*4 2. Screw*4 3.
Installing your Ceramic Hob 3
RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Installing your Ceramic Hob Bringing it all together CAUTION INS TALLATION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER Before installation (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
Installing your Ceramic Hob Bringing it all together The following operation requires building and/or carpentry work so must be carried out by a competent tradesman. Installation can be carried out on various materials such as masonry, metal, solid wood or plastic laminated wood as long as they are heat resistant (T 90°C). Create an opening with the dimensions shown in the paragraph 10.1 in the top surface of the counter, keeping a minimum distance of 50 mm from the rear edge.
Installing your Ceramic Hob Bringing it all together Electrical connection It is obligatory for the electrical system to be grounded according to the methods required by safety rules. Before the appliance being connected with the mains, please do assemble one full polar breaker with over 3mm opened on the mains, and the rated current of the breaker is strongly recommend over 40A. Never unplug by pulling on the cable.
Using your Ceramic Hob 4
Using your Ceramic Hob Getting the most from your appliance Description of control All the hob controls are grouped together on the front panel. The table below provides a description of the symbols used. 1 8 10 2 4 9 11 3 5 12 6 7 1. Cooking level display zone 2. Upper/increase button 3. Lower/decrease button 4.Timer setting LED display 5. Timer setting button 6.Hob button control lock On/Off 7. Hob On/Off button 8.Rear left-hand cooking zone button 9.Front left-hand cooking zone button 10.
Using your Ceramic Hob Getting the most from your appliance Use of the cooking hob Preparation Please ensure the sensor switch is off, than connected to the mains. These diameters for professional pan have been suitable to the electrical hob. Pan diameter mm Hob diameter mm 140 160 200 240 120 140 180 220 Hobs with touch-control buttons When an icon is pressed the unit beeps to confirm. To operate the panel of the hobs equipped with touch-controls, lightly press the icons printed on its surface.
Using your Ceramic Hob Getting the most from your appliance Timer To use the timed cooking, the hob must be unlocked out (if it is locked out, no operation can be done, press the button to enable the functions). First set the power level by following the instructions given in paragraphs “Hobs with touch-control buttons”, choosing the cooking zone in first place by pressing the relevant cooking zone button, then set the power level by pressing “+”and“-” buttons.
Using your Ceramic Hob Getting the most from your appliance Switching off To switch the hob off, hold down button for 1 second; This deactivates all cooking zones even if they are in use or the lock-out function is active, and the hob will turn off completely. will start flashing a few seconds after the hob is turned If the cooking zones have just been used, off to warn that they are still hot.
Care and maintenance 5
Care and maintenance Looking after your appliance Cleaning and maintenance Before any intervention, disconnect the power supply of the device. C l e a n i n g the ceramic hob The hob should be regularly cleaned; preferably after every use, once the residual heat warning lights have gone off. Smudges from aluminum-bottom pans can be easily cleaned off with a cloth dampened in vinegar. Remove any burnt residues after cooking with the scraper; rinse with water and wipe dry with a clean cloth.
Care and maintenance Looking after your appliance Technical specification We apologise for any inconvenience caused by minor inconstancies within these instructions that may occur due to product improvements and development All images and drawings are for illustration purposes only. or online at www.bush-support.
Product support 6
Product support Help is always at hand Troubleshooting DO NOT ATTEMPT TO REPAIR THIS APPLIANCE YOURSELF. CALL BUSH PRODUCT SUPPORT ON 01759 487838 OR CONSULT A QUALIFIED ELECTRICIAN POSSIBLE CAUSES PROBLEM The hob doesn’t work - The hob is not wired in or switched on at the wall.
Product support Help is always at hand Help and assistance If you require any technical guidance or find that your Ceramic Hob is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions or online at www.bush-support.com If you still require further assistance, call one of our experts on 01759 487838*.
Product support Help is always at hand Declaration of conformance to product standards This appliance conforms to all relavant standards applicable to domestic appliances sold in the UK Disposal This appliance/fitting is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).
Call us now and activate your 12 month guarantee Thank you for choosing Bush. Your new product is guaranteed against faults and breakdowns for 12 months. Don’t forget to register it with us today so we can provide you with our best possible after-sales service and useful updates. www.bushregistration.co.uk FREEPHONE* 0800 597 8548 Lines are open 8am - 8pm, 365 days a year. *Calls may be recorded and monitored.
Contact: www.bush-support.