Instruction Manual

Installing your tumble dryer
Bringing it all together
Installing your tumble dryer
16
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
IMPORTANT: Never remove the adjustable feet.
ELECTRICAL CONNECTION
ATTENTION: There is risk of fire and electric shock.
• Your dryer is set to 220-240 V and 50 Hz.
• The mains cable of the dryer is equipped with a special
plug. This plug must be connected to an earthed
socket protected by a fuse of 13 Amperes as indicated
on the type plate. The fuse current rating of the power
line where the outlet is connected must also be 13
amperes. Consult a qualified electrician if you do not
have such an outlet or fuse.
• Our company cannot be held responsible for damages
resulting from usage without earthing.
IMPORTANT: Operating your machine at low voltage
values will shorten the service life and decrease the
performance of your machine.
UNDER COUNTER INSTALLATION
• Leave at least 3 cm of space between the side and rear
walls of the product and the underside of the worktop
when installing your product under a counter.
• Assembly / disassembly under the counter if
neccessary must be done by authorised service.