Instruction Manual

Product support
31
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Product support
Help is always at hand
T
ROUBLESHOOTING
Your dryer is fitted with systems that continuously perform checks during the drying process. This enables it to take the
necessary measures and warn you in the case of any malfunction(s).
WARNING: If the problem persists even if you have applied the steps in this section, please contact the your dealer
or an Authorised Service Provider. Never try to repair a nonfunctional product.
PROBLEM REASON SOLUTION
The drying process takes a long
time.
The surface of the lint lter might be
clogged.
Wash the lter with lukewarm water.
The condenser might be clogged. Wash the condenser.
The ventilation grills in front of the
machine might be closed.
Open the doors/windows to prevent the room temperature from rising too much.
There might be a layer of limescale
on the humidity sensor.
Clean the humidity sensor.
The dryer might be overloaded with
laundry.
Do not overload the dryer.
The laundry might be insu󰀩ciently
spun.
Select a higher spin speed on your washing machine.
Laundry comes out damp at the end
of the drying process.
The laundry that comes out hot at the end of the drying process generally feels more humid.
The programme used might not be
suitable for the type of laundry.
Check the care labels on the laundry items, select a suitable programme for the
type of laundry and additionally, use the time programmes.
The surface of the lint lter might be
clogged.
Wash the lter with lukewarm water.
The condenser might be clogged. Wash the condenser.
The dryer might be overloaded with
laundry.
Do not overload the dryer.
The laundry might be insu󰀩ciently
spun.
Select a higher spin speed on your washing machine.
The dryer cannot be opened or the
programme cannot be started. The
dryer does not get activated when
adjusted.
The dryer might not be plugged in. Make sure that the plug is tted in the socket.
The loading door might be open. Make sure that the loading door is properly closed.
You might not have set a
programme or pressed the Start/
Pause key.
Make sure that the programme has been set and the dryer is not in the Standby
(Pause) mode.
Child lock might be active. Deactivate the child lock.
The programme has been
interrupted for no reason.
The loading door might not be
closed properly.
Make sure that the loading door is properly closed.
There might have been a power
failure.
Press the Start/Pause key to start the programme.
The water tank might be full. Empty the water tank.
Clothes have shrunk, felted or
deteriorated.
The programme used might not be
suitable for the type of laundry.
Check the care labels on the laundry items, select a suitable programme for the
type of laundry.
Water leaking from the loading door. There might be lint accumulated on
the inner surfaces of the loading
door and on the surfaces of the
gasket of the loading door.
Clean the inner surfaces of the loading door and the surfaces of the gasket of the
loading door.
The loading door opens on its own. The loading door might not be
closed properly.
Push the loading door until you hear a clicking sound.
The water tank warning symbol is
on/ashing.
The water tank might be full. Empty the water tank.
The water discharge hose might
be bent.
If the product is connected directly to the water outlet, check the water discharge
hose.