Manual

20
TROUBLE SHOOTING AND MAINTENANCE
If the refrigerator fails to work, check the following points before calling a service technician:
1. That the above installation and operating instructions have been followed.
2. The refrigerator is level.
3. If it is possible to start the refrigerator on any of the connected sources of energy.
4. If the refrigerator fails to work on gas, check:
- That the gas bottle is not empty.
- That all LP-gas valves are open.
5. If the refrigerator fails to work on 230 V, check:
- That the 230 V supply is connected to the refrigerator.
- That the fuse is intact.
If the refrigerator is not cold enough it may be because:
The ventilation of the cooling unit is inadequate.
The thermostat is set on the high temperature position.
The doors are opened frequently, or the gasket is not sealed properly.
Too much food at one time.
The gas pressure is incorrect - check the pressure regulator at the gas container.
If the refrigerator still does not work properly, call a service technician.
The sealed cooling system must not be opened, since it contains corroding chemicals under high
pressure.
MAINTENANCE
Inspect the gas hose periodically for cracks or deep chafing marks. Connections can be tested for leaks using
a soap solution.
WARNING: Do not use flame to check for leakage in the gas tubes.
DO NOT USE AN OPEN FLAME!
If there is any suspicion of damage, call for a service technician.
We recommend that a service technician check the refrigerator once a year
.