Instruction Manual Gas Refrigerator Models XCD-100 (LPG only) XCD-100D three way fridge XCD-185 two way fridge XCD-280 two way fridge Warning: Read this manual carefully and be thoroughly acquainted with its FOR YOUR SAFETY before this refrigerator Do not store or contents use gasoline or operating other flammable vapors and liquids in the vicinity of this or any other appliance. If you smell gas: 1. Evacuate enclosure. 2. Call for professional help.
TABLE OF CONTENTS Introduction PAGE ………………………………………….……………………………….. 3 Important Safety Precautions Warning …………………………………….…………….……. 4 ………………………………………….…………………………………. 5 Parts and Features …………………………….…….…...……….…...………..….…… 6 Installation instructions ... ……….. …………………….…. ……………… … …….. 9 Operation Instructions ……..………… ……….…….…….…….…….…. .… ……. ….11 Reversing the door ………………………………………………….….. …. ………16 Food Storage, Ice Making and Defrosting Cleaning ...............................................
INTRODUCTION Thank you for purchasing our gas refrigerator. This unit is designed to improve your living and entertaining comfort. The absorption system is totally silent that uses no compressors or fans. The refrigerator is ideal for installation in homes, farms, Cottages, chalets or similar. With its silent operation and unique design, you will enjoy the convenience and comfort for years to come. Please read through these instructions carefully before operating this refrigerator.
REFERENCE INFORMATION Please complete the following information for future reference. You will need it to obtain warranty service. Model Name*: __________________________________ Serial Number *: __________________________________ Date of Purchase: __________________________________ Place of Purchase: _________________________________ *The above information is written on the nameplate inside the cabinet. Retain this user manual with your sales receipt as a permanent record of your purchase.
Do not use the unit in the immediate surroundings of a bath, shower or swimming pool. Before discarding or storing, we recommend that you remove the door and leave the shelves in place. This will reduce the possibility of danger to children. The sealed cooling system must not be opened, since it contains corroding chemicals under high pressure. Check that the gas supplied to the refrigerator is at the correct pressure. See the pressure regulator on the LP gas tank.
PARTS AND FEATURES – Model XCD-100 1. Freezer compartment 2. Freezer door 3. Fridge compartment 4. Fridge shelf 5. Fridge door 6. Door balcony 7.
PARTS AND FEATURES – Model XCD-100D 1. Freezer compartment 2. Freezer door 3. Fridge compartment 4. Fridge shelf 5. Fridge door 6. Door balcony 7.
PARTS AND FEATURES – Model XCD-185 and XCD-280 Freezer door Freezer Light Egg tray Balcony Shelf Fridge Fridge door Control panel OFF / ON 1 For connection to cylinder valve outlet Connection No.600 Pressure regulator supplied with the appliance must be used 2 OFF / ON 1 2 FOR USE WITH PROPANE GAS ONLY POWER O N OPEN CLOSE O FF MAX PUSH WHEN LIGHTING 4 3 OFF MAX - AAA - GAS + V=1.
INSTALLATION INSTRUCTIONS It is advisable to clean the inside of the absorption refrigerator with lukewarm water using a mild detergent, and then to dry it thoroughly prior to use. LEVELLING AND VENTILATION The refrigeration system of the cabinet is designed to operate with the cabinet located on a flat surface. Avoid tilting the cabinet side.
LP GAS CONNECTION The refrigerator is designed for operation on LP gas, the pressure of which must be 2.75kPa for Propane Check that this is stated on the dataplate. The refrigerator is NOT designed for operation on town gas or natural gas. CAUTION! CHECK THAT THE GAS SUPPLIED TO THE REFRIGERATOR IS AT THE PROPER PRESSURE. SEE THE PRESSURE REGULATOR ON THE LP GAS CONTAINER.
OPERATION INSTRUCTIONS – Model XCD-100 A: Piezo igniter B: Flame indicator C: Safety valve D: Thermostat knob OFF / ON PUSH WHEN LIGHTING Fig1 A B C D After initial installation, servicing, or changing gas cylinders etc., the gas pipes may contain some air which should be allowed to escape by briefly turning on the refrigerator. This will ensure that the flame lights immediately. 1. Make sure that all valves between the gas container and the refrigerator are open. 2.
OPERATION INSTRUCTIONS – Model XCD-100D A: Piezo igniter B: Flame indicator C: Safety valve button D: Thermostat knob E: Power on lamp F: Power switch Fig1 A B C D E F The refrigerator can be run on either 230 V or LP gas, or even 12VDC for some models. Changing between these modes of operation is carried out by means of control buttons positioned as shown in fig. 1. The piezoelectric igniter discharges sparks over the burner when the button (A) is depressed.
Regulating the temperature It will take several hours for the refrigerator to reach normal operating temperature. The temperature of the main compartment of the refrigerator is controlled by a thermostat. The thermostat knob should be set at 1-4. If a lower (colder) temperature is desired, set the thermostat to a higher figure. Please note that too much lower temperature might make vegetable or egg frozen. Turning Off The Refrigerator If the refrigerator is not to be used for some time: 1.
OPERATION INSTRUCTIONS – Model XCD-185 & XCD-280 （Battery ignition） For connection to cylinder valve outlet Connection No.600 Pressure regulator supplied with the appliance must be used 1 OPEN FOR USE WITH PROPANE GAS ONLY 2 OFF / ON CLOSE OFF MAX 4 - AA A - + V=1.
Turning Off The Refrigerator If the refrigerator is not to be used for some time: 1. Shut off any valve in the gas line to the refrigerator. 2. Empty the refrigerator. Defrost and clean it as described in the following paragraph. It must be completely dry inside to avoid mold growth (if possible have the door open). 3.
REVERSING THE DOOR (OPTION) – Models XCD-100 and XCD-100D How to reverse the door Remove the lower hinge by loosening and removing the screws with screwdriver (2). Carefully lower the door and remove it. Remove the three screws from the left top hinge(1) position, take the plastic part off the hinge position. Remove the three screws from the right top hinge and take off the hinge, insert the plastic part, rivet the three screws thereafter.
REVERSING THE DOOR (OPTION) - Models XCD-185 and XCD-280 How to reverse the door Remove the right three hinges by loosening and removing the screws with screwdriver. Carefully lower the doors and take them off the cabinet. Change the hinges to the left sides. Mount the top and bottom hinges first, then insert the two doors. Mount the middle hinges. Note: As the door gasket gets pressed-in during shipment, after reversing the door the gasket might have to be reset.
FOOD STORAGE The freezer compartment is not intended for quick freezing of foods. It keeps food frozen. The fresh food compartment stores and cools food. For best cooling performance, air must circulate within the fresh food compartment. Do not cover the shelves with paper, plastic, etc. To reduce frost on the cooling fins, cover liquids and moist foods. Do not place hot foods in the compartment, and do not leave the door open longer than needed.
Cleaning the burner Take off the protection hood and do the following: 1. Clean the openings and the burner screen with a toothbrush; 2. Clean and inspect the electrode and thermocouple. If either is corroded, have it changed. Check that they are well attached and if necessary tighten the screws; 3. Check that the spark is created by pressing the electric piezo igniter button on the control panel. 4.
TROUBLE SHOOTING AND MAINTENANCE If the refrigerator fails to work, check the following points before calling a service technician: 1. That the above installation and operating instructions have been followed. 2. The refrigerator is level. 3. If it is possible to start the refrigerator on any of the connected sources of energy. 4. If the refrigerator fails to work on gas, check: - That the gas bottle is not empty. - That all LP-gas valves are open. 5.
LIMITED WARRANTY As a condition to any warranty service obligation, the consumer must present the Warranty Certificate along with a copy of the original purchase invoice. THIS WARRANTY DOES NOT COVER: 1) Damage, accidental or otherwise, to the absorption refrigerator while in the possession of a consumer not caused by a defect in material or workmanship. 2) Damage caused by consumer misuse, tampering, or failure to follow the care and special handling provisions in the instructions.
TECHNICAL DATA – Model XCD-100D Model XCD-100D Dimensions without packing (mm) Height(including leveling feet) 790 Width 512 Depth 600 Depth(with the door open 90°) 1040 Weight (Net) 34kg Location of Gas Inlet On left hand side looking from rear. 73mm from bottom edge, 40mm from left side. Capacity (liters) Total 95 Refrigerator 85 Freezer 10 Gas Type Propane Inlet pressure 2.75kPa Voltage AC230V / DC12V Input power AC 150W / DC 150W Energy consumption net / 24 hours 1.
TECHNICAL DATA – Model XCD-185 Model XCD-185 Dimensions without packing (mm) Height(including leveling feet) 1460 Width 600 Depth 640 Depth(with the door open 90°) 1194 Weight 72kg Location of Gas Inlet On left hand side looking from rear. 79mm from bottom edge, 57mm from left side. Capacity (liters) Total 174 Refrigerator 128 Freezer 46 Gas Type Propane Inlet pressure 2.75kPa Test Point pressure 2.
TECHNICAL DATA – Model XCD-280 Model XCD-280 Dimensions without packing (mm) Height(including leveling feet) 1630 Width 600 Depth 730 Depth(with the door open 90°) 1284 Weight 85kg Location of Gas Inlet On left hand side looking from rear. 79mm from bottom edge, 57mm from left side. Capacity (liters) Total 265 Refrigerator 206 Freezer 59 Gas Type Propane Propane pressure 2.75kPa Test Point pressure 2.
