Manual

Pg. 5

Continued on Next Page…

1. Check to see that there is NO EXCESSIVE OIL in the Bore. If there is, swab it out with a patch and the

cleaning rod. ALWAYS CLEAN A NEW FIREARM BEFORE FIRING.

WARNING! If the Firearm is fired with oil - or water - in the barrel, excessive pressure will be created causing

it to explode.

2. Retract the Bolt to ensure free movement between Bolt and Receiver.

3. Perform Safety Function Check (below) to ensure that Safety Selector Lever works properly.

1. Remove Magazine if installed. Pull Charging Handle assembly to rear. Check that Chamber is clear. Let the

Bolt close. Do not pull Trigger. Leave Hammer in cocked position.

WARNING: If the Firearm fails any of the following tests, continued use of

it could result in injury to, or death of, people around you.

2. Place Selector Lever in SAFE position, point Firearm in a safe direction, and pull Trigger.

THE HAMMER SHOULD NOT FALL.

UNLOAD FIREARM - REMOVE MAGAZINE - CHECK CHAMBER

CHECK BEFORE YOU FIRE! …

PREVENTATIVE MAINTENANCE CHECKS & SERVICES…

SAFETY FUNCTION CHECK…