User's Manual

USING THE SETUP MENU INPUT SCREENS

Camera Name Input

After selecting the Camera Name parameter (the only setting is "Input"),

press OK. If necessary, delete the previous or default name by pressing the

RIGHT key until the backspace symbol ( ) (located between letters "A"

& "B", also between "j" & "k") is highlighted, then keep pressing OK. Select

(highlight) each alphanumeric character you want, using the LEFT/RIGHT

keys, and pressing OK after each one to set it. When ﬁnished naming the

camera, press MENU to save the name to memory.

Coordinate Input

After selecting the Coordinate Input parameter, press UP or DOWN to

select the On setting and press OK. The latitude and longitude for any

location where you plan to place the camera can be obtained at many

websites, for example: http://itouchmap.com/latlong.html. You can enter

a nearby street address, just zip code, or use the various types of maps to

locate the approximate position. The format you will need to use to enter the

coordinates in the NatureView Cam menu screen is shown below:

Longitude

Latitude

W=West,

E=East

N=North,

S=South

Minutes Seconds

Degrees

Latitude

(3 digits)

Degrees

Longitude

(3 digits)

(La) N000,00'00"

(Lo) W000,00'00"

Note: You may see "negative" latitude or longitude coordinates online. These

designate South latitudes and West longitudes. US/Canada locations will

have North (+) latitude coordinates and West (-) longitude coordinates.