Instructions

31
Reviewing Images by Connecting the Camera to a Computer
You can always unmount the entire camera from the tree and connect its USB port
to a computer-it will be recognized as a “removable disk”, without the need to install
any drivers or software. When using a PC (or Mac*) to view photos (or video clips*),
first connect the device to the computer with a USB cable (not included, available
at most electronics/computer retailers) that has a “Mini-B” USB plug on one end
(camera) and a “Standard-A” USB plug at the other end (computer). Then use
commercial software with an image browser feature, or an image browser included
with the PC’s operating system to view images saved on the SD card in the folder
\DCIM\100EK113 (a new folder will be created every 1000 images). Each new
image or video will be numbered incrementally with 8 digits in order of the time it was
captured-the first 4 digits are the month and day, the last 4 digits the # of the image.
For example, you will see file names such as “09020001.JPG” or “09020001.MP4”,
etc. Through the file format suffix you can distinguish whether the file is a still photo
(with suffix .JPG) or a video (with suffix .MP4).
*video files may require additional software for viewing on a Mac.
The Trophy Cam HD Aggressor supports 3 kinds of file system formats, FAT12,
FAT16, and FAT32. The default value is FAT16 to save photos and videos. Here are
some related notes:
• You don’t need to be concerned about the file system format of the Trophy
Cam HD Aggressor unless your equipment has problems reading the SD
card. If this happens, please format the SD card with the Trophy Cam HD
Aggressor or in your computer first and then insert the card into your Trophy
Cam HD Aggressor and try again.
• The default file system format of the Trophy Cam HD Aggressor is FAT16,
which most computers can read. If you format an SD card for the Trophy Cam
HD Aggressor in your computer, you should choose the file system format
FAT16. Normally FAT16 is recommended unless you have another image viewer
that uses FAT12 or FAT32 format.
Deleting Photos or Videos
To delete all photos from the installed SD card, use the Format parameter (see pg.
24 for details).