Instructions

be monitored, with the camera placed at a height of 5-6.5 ft. (1.5~2 m). Also, keep in mind that you will

get the best results at night when the subject is within the ideal flash range, no farther than 100ft/30m

(119936C/119975C) and no closer than 10ft (3m) from the camera.

There are two ways to mount the Core Trail Camera: using the provided adjustable web belt, or the

tripod socket.

Using the adjustable web belt: Fig. 5 illustrates using the web belt on the Core Trail Camera. Push one

end of the belt through the two brackets on the back of the Core Trail Camera. Thread the end of the

strap through the buckle. Fasten the belt securely around the tree trunk by pulling the end of the strap

firmly so there is no slack left. Using the tripod socket: The camera is equipped with a socket at the

bottom end to enable mounting on a tripod or other mounting accessories with a standard1/4-20

thread.

Fig. 5 Attaching the Belt

Note: an accessory solar panel supplemental power source (#119756C) is also available -

please visit www.bushnell.com for more information.