BatteryChargers AA RECHARGER POWERCHARGER Quick Start Guide Model # PP2020/PP2010 04-13
IMPORTANT SAFETY INFORMATION Please read this manual in its entirety before operating your Bushnell POWERSYNC product. It contains important information concerning the setup, operation and maintenance of the product. Keep this manual for future reference. • WARNING: This product should only be used with the supplied charging unit and accessories (not included with all models).
HOW THE BatteryChargerS WORK The PowerCharger (PP2020) with internal power source (Lith-Ion battery) and the AA Recharger (PP2010) with removable power source (AA NiMh batteries) store electrical energy, so it can be used to recharge your portable electronic devices whenever you’re away from your home or campsite. Press the orange lid latch button on the side of the battery charger to access the Input and Output ports as shown below.
CHARGING THE BatteryCharger FROM THE WALL CHARGER 1. 2. 3. 4. (Model PP2010 only) Press the front battery pod grip (A) in until it clicks, then pull the battery pod (B) out of the bottom of the battery charger. Insert the 4 supplied AA NiMh rechargeable batteries if they are not already in place. Press the lid latch button and pull open the top of the BatteryCharger.
UNDERSTANDING THE POWERSYNC POWER GAUGE The 4 LED charge indicators behind the Power Gauge (C) allow you to monitor the status of the BatteryCharger’s internal battery. While the battery is charging from the AC wall charger, the LEDs will light up in sequence to show the charge level as shown in Fig. 1. The LED indicating the current battery level will blink rapidly while charging. When charging is complete, all LEDs remain on for 10 min., then shut off until the Power button is pressed. Blinking Fig.
TECHNICAL SPECIFICATIONS Model PP2020 PowerCharger PP2010 AA Recharger Weight 9.3 oz / 167 g 7.9 oz / 153 g Size 5.9 x 3.3 x 1.1 in. 5.0 x 3.1 x 0.9 in. Charge Time (Wall Charger) approx. 8 hrs. approx. 5 hrs. Power Output 5 volts, 1 amp (1000 mA) 5 volts, 1 amp (1000 mA) Internal Battery Type High Capacity Lith Ion (20 Whr) n/a Removable Batteries (included) n/a 4x NiMh rechargeable AA (2000ma) USB Inputs / Outputs 1 / 2* 1/1 Operating Temp.
ONE YEAR LIMITED WARRANTY Your Bushnell® POWERSYNC product is warranted to be free of defects in materials and workmanship for one year after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department.
Customer Service: (800) 423-3537 www.bushnell.