BatteryBar™ Quick Start Guide Model # PP2016/PP2008 04-13
IMPORTANT SAFETY INFORMATION Please read this manual in its entirety before operating your Bushnell POWERSYNC product. It contains important information concerning the setup, operation and maintenance of the product. Keep this manual for future reference. • WARNING: This product should only be used with the supplied charging unit and accessories (not included with all models).
HOW THE BatteryBar WORKS The BatteryBar™ uses a lithium ion battery to store electrical energy, so it can be used to recharge your portable electronic devices anywhere, anytime. The BatteryBar’s battery is charged from an AC outlet (PP2016) or the USB port on your computer (PP2008), so it’s ready to provide immediate power on demand whenever you’re away from your home or campsite.
CHARGING THE BATTERYBAR FROM THE WALL CHARGER Step 1 (Model PP2016): Connect USB cable to micro-USB INPUT port (A) from the USB port on the supplied AC charger (pg. 2), and plug it into a wall outlet (100-240v). Step 1 (Model PP2008): Connect USB cable to micro-USB INPUT port (A) from a USB port on a computer. Avoid connecting to unpowered USB hubs and USB ports located on keyboards, etc. to ensure you get full power from the computer. Make sure the computer is powered from an AC outlet.
UNDERSTANDING THE POWERSYNC POWER GAUGE The 4 LED charge indicators on the INPUT end of the battery cylinder (A) allow you to monitor the status of the BatteryBar’s internal battery. While the battery is charging from the AC wall charger, the LEDs will light up in sequence to show the charge level as shown in Fig. 1. The LED indicating the current battery level will blink rapidly while charging. When charging is complete, all LEDs remain on for 10 min., then shut off until the Power button is pressed.
TECHNICAL SPECIFICATIONS Model PP2016 (USB2) PP2008 (USB1) Weight 5.9 oz / 167 g 5.4 oz / 153 g Size 9.2 x 1.4 in. 9.2 x 1.4 in. Charge Time (Wall Charger) approx. 6-8 hrs. approx. 4-6 hrs. Power Output 5 volts, 1 amp (1000 mA) 5 volts, 1 amp (1000 mA) Internal Battery Type Dual Lith Ion Single Lith Ion USB Inputs / Outputs 1 / 2* 1/1 Operating Temp. Range -4 ~ 112 F (-20~44 C) -4 ~ 112o F (-20~44o C) Storage Temp.
ONE YEAR LIMITED WARRANTY Your Bushnell® POWERSYNC product is warranted to be free of defects in materials and workmanship for one year after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department.
Customer Service: (800) 423-3537 www.bushnell.
