Owner Manual

RAINGUARD

HD LENS COATING

This technology gives you a signiﬁcant improvement in brightness and light transmission and provides unequaled clarity in

the worst conditions. RainGuard

HD is the ﬁrst external lens coating to protect your riﬂescope against external fogging. Has

your scope ever fogged on a cold day because you accidently breathed on your eyepiece? Have you ever hunted on a cold,

wet day and found it almost impossible to keep the outside of your scope from fogging? RainGuard

HD will help prevent

these problems.

HOW IT WORKS

RainGuard

HD is a special water repellant lens coating on which condensation forms in much smaller droplets than on

standard coatings. These droplets form when the scope is exposed to rain, fog or snow. These smaller droplets scatter much

less light than the larger droplets on other coatings. This results in a much clearer and more useable sight picture. Additionally,

water sheets off RainGuard

HD much more readily than a standard coating. For the ﬁrst time, the hunter will not miss the shot

of a lifetime because moisture was on the lens.

CARE OF RAINGUARD

RainGuard

HD is an extremely durable, scratch-resistant, permanent coating that will give you years of service. To get the best

performance, just keep the lenses clean. To clean, ﬁrst blow away any dirt and dust or use a soft lens brush. Fingerprints and

lubricants can be wiped off with lens tissue or a soft, clean cotton cloth moistened with lens cleaning ﬂuid.

EYEPIECE FOCUSING

This adjusts the focus so that the reticle (cross hairs) appears sharp to your eyes. All Bushnell riﬂescopes are focused at the

factory for 20/20 or corrected vision. If the reticle appears sharp, no adjustment is needed. If the reticle appears unsharp,

adjust as follows.