Owners manual

Bushwacker only approves installing the Hood Protector according
to these written instructions with the hardware provided. WARNING:
Failure to install according to these instructions will invalidate
the warranty. This includes, but is not limited to using alternative
installation methods, hardware, or materials. DO NOT USE: Loctite,
SuperGlue, or similar products on the hardware or the fl ares.
Fit: Verify the fi t of the Hood Protector to vehicle. (Some fi ling,
sanding, or cutting may be necessary to ensure proper fi t).
Painting: (Optional) if paint is desired it must be done prior to
installing Trail Armor on vehicle. Clean outer surface with a good
grade degreaser. DO NOT USE LACQUER THINNER OR ENAMEL
REDUCER AS A DEGREASER. Wipe outer surface thoroughly with a
tack rag prior to paint. Then follow the paint manufacturer process for
TPO plastic.
STEP 1 – PRIOR TO INSTALLATION
A)
B)
C)
1 pc
Jeep
®
Trail Armor
®
Rear Part #14006
Rev-4 12/3/2013
• Utility Knife
• To claim a warranty, you must provide
Proof of Purchase.
LIMITED LIFETIME WARRANTY AGAINST
ANY MANUFACTURING DEFECTS
TOOLS FOR EASY INSTALLATION:
Included in Hardware Kit:
1.
For complete fi tment info visit : www.bushwacker.com
Hood Stone Guard
4325 HAMILTON MILL RD • BUFORD, GA 30518 • 800-241-7219 (USA AND CANADA) • FAX [phone]
1