Owners manual

4325 HAMILTON MILL RD • BUFORD, GA 30518 • 800-241-7219 (USA AND CANADA) • FAX [phone]
Place the soft top hardware tubes assembly on top
of the main deck fabric then insert into the front
pocket. Secure with snaps as shown. Tip: Place
front metal into corner pockets and pull all the
way until it ts snug.
Use a Torx T25 bit to remove both the footman
loop from the windshield on both the driver’s and
passenger’s side as shown.
Secure the Flip Top tube to the Soft Top main deck
by engaging the Hook and Loop aps as shown on
both sides.
Install provided latch as shown and reattach with the
Torx T25 bolt from the previous step.
When the top is in the folded back position reach up
and hook the retention strap over the bar as shown.
Note: The strap is used to safely secure the soft
top in the open position at high speeds.
Make sure to unhook the retention strap from the bar
before folding the top forward again.
18 19
20 21
22
23