Owners manual

4325 HAMILTON MILL RD • BUFORD, GA 30518 • 800-241-7219 (USA AND CANADA) • FAX 800-438-3788

TIP: Place the top face down and re-fold,

beginning with the rear window portion. It may

be helpful to have a second person for this step.

Tuck the plastic strip into square metal part as shown

for proper t as shown both sides.

Using the supplied 4mm Allen key, install the

Shoulder Bolts from the outside of each soft top

header assembly knuckle and tighten each bolt with

a lock nut 4 places. The lock nut will t into plastic.

Lift the folded soft top and hardware assembly onto

the the top of the Wrangler sport bar. Place and

center toward the front windshield gasket and line up

4 pivot point clamps as shown.

Pull the ip top header assembly tightly against the

windshield seal and hook to catch. For proper tight

adjustment of the latches, unscrew each front screw

hook latch where the latching hook just reaches the

header assembly.

Closed and secure the front latches as shown on

both sides at this time.

24 25