Owners manual
4325 HAMILTON MILL RD • BUFORD, GA 30518 • 800-241-7219 (USA AND CANADA) • FAX 800-438-3788
Still holding are to fender, re-install remaining
factory screws removed in Step 4 using 7mm socket
and wrench. Tighten all screws.
9
Completed front are installation.
10
Position are on fender, pressing inward on the are,
line up the are mounting holes with the mounting
clips on the inner piece. Install 3 Phillips Truss
Screws (SW1-0058) through the are and into the
clips on the inner piece. Do not tighten. (3 locations)
8