Installation Manual

Position fl are on fender and reinstall the four factory
screws removed in Step 4.
5
Front Flare Installation Procedures (Driver’s Side):
Using a 7mm socket, remove four factory screws
from wheel well and save for reinstallation.
4
Factory screws
Verify fi t and tighten all screws.
6
7 8
Rear Flare Installation Procedures (Driver’s Side):
Holding fl are in position on fender, use a grease
pencil to mark the four clip locations.
Four clip locations.
4325 HAMILTON MILL RD • BUFORD, GA 30518 • 800-241-7219 (USA AND CANADA) • FAX [phone]
3