Installation Manual

Install narrow clips in these locations. See step 10.
Slide “S” clip over plastic tab.
Remove two factory installed screws using an 8 mm
socket wrench. Keep screws for installation of the
rear fl are.
9
13
8
Rear Flare Installation Procedures (Driver’s Side)
6710 N CATLIN AVE. • PORTLAND, OR 97203 • 503-283-4335 • 1-800-234-8920 (USA AND CANADA) • FAX [phone]
Hold fl are in place and mark three locations with a
grease pencil using the holes in the fl are as a guide.
See step 12 & 13.
Install plastic tab on sheet metal centered over
mark.
11
12
Install narrow clip over existing factory hole.
10