Installation Manual

6710 N CATLIN AVE. • PORTLAND, OR 97203 • 503-283-4335 • 1-800-234-8920 (USA AND CANADA) • FAX [phone]
Completed rear fl are installation.
19
Hold fl are in place on vehicle and start #8 pan-head
screws through holes in fl are, narrow clips, and into
factory holes using a #2 Phillips screw driver. Do not
tighten.
Using an awl or other similar pointed tool make sure
that three “S” clips are lined up with the fl are holes.
Start three #10 truss head screws through holes
in fl are and into “S” clips using a #2 Phillips screw
driver. Do not tighten.
14
16 17
Start two factory screws using an 8 mm socket
wrench. Do not tighten.
Press fi rmly on fl are and tighten all screws.
15
18