Owners manual

Install Clip (CL1-0022) over existing factory holes. There
are two holes at the top center location. The hole for proper
installation is the one toward the front of the vehicle. NOTE:
The clip may fi t over the lip loosely. This can be fi xed by
pinching the clip more tightly to the vehicle.
Press fi rmly on fl are and tighten all screws. Completed front fl are installation.
11
Hold fl are to vehicle and start supplied Screws (SW1-
0056) with a Phillips screwdriver. Do not tighten.
10
9
12 13
Install two tabs (MT1-0002) over factory holes. There
are two factory holes near the rearward arrow. The
correct hole for install is the one more toward the
front of the vehicle.
Install Clips (CL1-0022) at these locations. See
Steps 9-10.
8
4325 HAMILTON MILL RD • BUFORD, GA 30518 • 800-241-7219 (USA AND CANADA) • FAX [phone]
4