Owners manual

Install Clip (CL1-0022) in this location. See step 19.Remove these six factory installed screws using an
8mm socket wrench. X’s indicate a factory screw
that will not be removed.
Install Clip (CL1-0022) over existing hole.
15
1716
18
Rear Flare Installation Procedures (Passenger’s Side):
2012 Models Only (Optional): If you encounter a fi t
problem, remove inner piece at bottom rear and front
of wheel well.
2012 Models Only (Optional): Remove inner piece
at bottom rear of wheel well using a pry tool.
14
Install plastic tab over existing factory hole.
19
4325 HAMILTON MILL RD • BUFORD, GA 30518 • 800-241-7219 (USA AND CANADA) • FAX [phone]
5