BK-GR-2 Product Information Guide
Safety Information Trademark Credits WARNING! Windows is a registered trademark of the Microsoft Corporation Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Unplug the amplifier from the audio source and power outlet before cleaning the amplifier with a dry cloth. Place the amplifier and ButtKicker® Gamer equipped chair in a stable location so they will not call causing damage to the electronics or bodily harm.
Packing List: (1) ButtKicker Gamer with Easy Clamp attachment mechanism (1) ButtKicker Power Amplifier BKA-130-C (1) Amplifier Base Stand (1) BKA-130-C Owners manual (1) 13.5 cable with quick release and strain relief (1) RCA Y adaptor female to dual male (1) (1) (1) (2) (1) (1) Mini Y adaptor male to dual female 5 mini to RCA cable 5 RCA to RCA cable Velcro wraps Product Information Guide Quick Start Guide Thank you for purchasing the ButtKicker Gamer.
PC Audio Signal Connection The ButtKicker® Gamer is designed to work with low frequency audio signals. With a 5.1 / 7.1 sound card, use the mini Y adaptor to split the audio signal from the center / sub output (refer to your soundcards manual to locate this output). With a stereo soundcard use the mini Y adaptor to split the audio signal from the stereo (line out) output. Please refer to the enclosed Quick Start Guide for further installation information.
Console Gaming Systems The ButtKicker Gamer can be hooked up to most gaming consoles.The best source of signal for the ButtKicker is the subwoofer or .1 track of a Dolby Digital, DTS, or Multi-Channel Direct system. Most of todays consoles offer a .1 channel output through the use an additional adaptor or cable and a surround sound receiver. With these systems, the ButtKicker Gamer should be hooked up through the subwoofer output of the surround sound receiver.
Operating the ButtKicker Power Amplifier BKA-130-C Please consult the BKA-130-C Owners Manual for operating instructions. Fine-Tuning Amplifier Adjustments: High and Low Cutoff Filters The Low Filter Cutoff is designed to significantly reduce (12 dB per octave roll off) the extremely low frequencies, those below 25 Hz. This is the subsonic range, below the frequencies that we can hear with our ears. In movies and games, this is usually where large explosions will shake you.
Specifications ButtKicker Gamer Dimensions: Frequency Response: Weight: Impedance: 11.5" L x 2.75" H x 3" W 10 - 250 Hz 2 lbs. 12 oz. / 1.2 kgs. 2 ohms ButtKicker Power Amplifier BKA-130-C Dimensions: Weight: Power Output: 9.5" L x 2.3" H x 7.5" W 5.6 lbs. / 2.5 kgs. 90 Watts rms @ 2 ohms Warranty PRODUCT WARRANTIES: This Guitammer Company product is warranted against defects in materials and workmanship for a period of one (1) year from the date of purchase by the original end-user.
If you have questions or need technical support, please contact The Guitammer Company, not the store where you purchased the product. STOP! The Guitammer Company Inc. 1-888-676-2828 8:30 AM 5:30 PM EST Email us at: support@guitammer.com Visit us on the web at: www.thebuttkicker.com FAQs Q. Everything is hooked up but Im not getting any output from the ButtKicker® Gamer? A. Here are a few things to check.
