Product information guide
04
Console Gaming Systems
The ButtKicker Gamer can be hooked up to most gaming consoles.The best source
of signal for the ButtKicker is the subwoofer or .1 track of a Dolby Digital, DTS, or
Multi-Channel Direct system. Most of todays consoles offer a .1 channel output through
the use an additional adaptor or cable and a surround sound receiver. With these
systems, the ButtKicker Gamer should be hooked up through the subwoofer output
of the surround sound receiver. Please refer to the enclosed Quick Start Guide for
detailed installation information.
Hooking up the ButtKicker Power Amplifier to
an Auxiliary Audio Device
The ButtKicker Gamer is not limited to use with computers or console gaming systems.
It can be used with any device that has an audio signal output. These devices include
digital music players, CD players, bookshelf audio systems or even record players.
It is important to remember that the ButtKicker Gamer will only respond to the low
frequency material that is sent to it. This may not be as strong in some devices as it
is in others.
1. Find the line level or headphone audio output for the device. This may be an
RCA, mini or a different style of connector.
2. Connect the audio output to the amplifier line level input (RCA).
This may require additional adaptors if the output is not RCA or mini.
3. Use either a mini or RCA Y adaptor into this line if additional connections
need to be made.