Owner`s manual

ManualsBrandsButtKicker ManualsAmplifierBKA-130-C

QUICK START

GUIDE

Thank you for purchasing the ButtKicker

Individual Seat Control System™

This guide will help you quickly set up and use your new system

BK-ISCS

Contents:

[1]ButtKicker® mini Concert

transducer

[1] BKA-130-OE or 130-C Power

Amplifier and Remote Control

BUTTKICKER

INDIVIDUAL SEAT CONTROL SYSTEM

™

[Optional] ButtKicker Wireless Package

Included Cables:

[1] RCA “Y” splitter cable

[1] 1 meter RCA male to male cable

Summary of content (7 pages)

PAGE 1
BK-ISCS BUTTKICKER ® INDIVIDUAL SEAT CONTROL SYSTEM ™ QUICK START GUIDE Thank you for purchasing the ButtKicker® Individual Seat Control System™ This guide will help you quickly set up and use your new system Contents: [1]ButtKicker® mini Concert transducer [1] BKA-130-OE or 130-C Power Amplifier and Remote Control [Optional] ButtKicker Wireless Package Included Cables: [1] RCA “Y” splitter cable [1] 1 meter RCA male to male cable
PAGE 2
START HERE BEFORE YOU BEGIN: Please read all safety instructions located in the “ButtKicker Power Amplifier BKA-130-OE / C Owner’s Manual” prior to installation. ButtKicker® mini Concert Installation 1) The ButtKicker mini Concert transducer is designed to be installed directly to the frame of your chair(s). While each installation will vary based on your chairs’ construction, the basic steps apply to all chairs. a) The mini Concert transducer should be attached firmly to the frame of your chair.
PAGE 3
INSTRUCTIONS FOR OPTIONAL WIRELESS SETUP (FIGURE 5) 1. CONNECTING TO YOUR A/V PROCESSOR 1) You will need the optional ButtKicker Wireless Package. 2) Plug the supplied RCA Y connector into the SUBWOOFER or PRE OUTPUT of your A/V processor. This will allow you to use both a subwoofer and the ButtKicker system with your A/V processor. a) Plug the RCA cable for your subwoofer into one side of the RCA Y connector (if applicable).
PAGE 4
RCA cable (not included) from A/V Processor to INPUT (on first amplifier) RCA cable from OUTPUT (first amplifier to INPUT (second RCA Cable amplifier) (to next amplifier) BKA-130-C Amplifier amplifier) HARD WIRED INSTALLATION BKA-130-C Amplifier RCA CableSpeaker wire from Chair (to next amplifier) RCA cable from OUTPUT (second amplifier) to INPUT (next amplifier) Please note: Amps are placed outside of chairs for illustrative purposes only RCA Cable (from first amplifier) ButtKicker RCA cable fr
PAGE 5
ButtKicker BKA-130-C Power Amplifier RCA Cable (included) from BK-LINK Receive Unit to INPUT on amplifier (on second amplifier) TO INPUT (on first amplifier) RCA Cable From OUTPUT (on second amplifier) TO INPUT (on first amplifier) RCA Cable From OUTPUT ButtKicker BKA-130-C Power Amplifier (From Chair) Speaker Wire (to INPUT on next amplifier) RCA Cable chairs for illustrative purposes only Optional Wireless Installation Please note: Amps are placed outside of ButtKicker ® Individual Seat C
PAGE 6
STOP! If you have questions or need technical support, please contact The Guitammer Company, not the store where you purchased the product. The Guitammer Company 1-888-676-2828 8:30 AM – 5:30 PM EST Email us at: support@guitammer.com Visit us on the web at: www.thebuttkicker.com FAQ’s Q. Where should I place the ButtKicker Wireless Send unit? A. The ButtKicker Wireless send unit needs to be within 50’ of your chairs, and does not need to have a line of sight between it and the chairs. Q. A.
PAGE 7
STOP! If you have questions or need technical support, please contact The Guitammer Company, not the store where you purchased the product. The Guitammer Company 1-888-676-2828 8:30 AM – 5:30 PM EST Email us at: support@guitammer.com Visit us on the web at: www.thebuttkicker.com FAQ’s Continued Q. Will the BKA-130-OE / C amplifier cause a Ground Loop Issue in my home theater system? A. The BKA-130-OE / c amplifier has an internal ground loop isolator and will not generate a ground loop. Q.