Product Manual

www.buyersproducts.com
Phone [phone]
Fax [phone]
Installation Instructions
RC10S Small Rubber Clamp
1. Use #10 bolt or screw to fasten. Do not
over tighten.
2. Clamp can be mounted with the strap
facing in any direction.
3. To Clamp: put the tool or implement
into the jaws. With both of your thumbs on
the strap, push strap to reach the desired
tightness. Repeat
4. For certain applications, like roof racks
with round tubing, you can install the
clamps using hose clamps. Make sure you
center the hose clamp on the plastic wash-
er to avoid cutting into the rubber clamp.
5. For small diameter objects: push jaw
without strap down inside other jaw and
tighten strap on top of jaw
6. Clamp can also be used as a pipe
stand-off (particularly suited for marine
applications). Do not use on exhaust pipes.
RC10S Inst. Rev. B
Bolt
Washer
Nut
Plastic Washer
(included)
Warranty
Buyers Products Co. warrants all truck/trailer hardware manufac-
tured or distributed by it, to be free from defects in material and
workmanship for a period of one year from date of shipment. Parts
must be properly installed and used under normal conditions. Any
product which has been altered, including modification, misuse,
accident or lack of maintenance will not be considered under
warranty. Normal wear is excluded. The sole responsibility of Buyers
Products Co. under this warranty is limited to repairing or replacing
any part or parts which are returned, prepaid, and are found to be
defective by Buyers Products Co. Authorization from Buyers Products
Co. must be obtained before returning any part. No charges for
transportation or labor performed on Buyers’ products will be allowed
under this warranty.