User guide

9
5] Service
Should you experience any technical problem with your SOC 1.1, contact your dealer or
Buzz Audio for recommendations on what to do. The modular nature of the SOC 1.1
construction means most electronic faults can be easily repaired by swapping circuit
boards.
For on line support visit our web site; www.buzzaudio.com
Buzz Audio, 77 Kent Tce, PO Box 6677, Te Aro, Wellington,
New Zealand. Voice/Fax 64+4+385-2478.
Email; [e-mail]
6] Specifications
Max Input/Output Level = +23.5dBu.
Measured with 2k ohm load and 0dB output gain makeup.
Frequency Response = 4Hz to 250kHz.
-3dB points with no gain reduction.
Harmonic Distortion = less than 0.008%.
Measured 100Hz to 10kHz with no gain reduction.
Harmonic Distortion = less than 0.03%.
Measured 100Hz to 10kHz with 20dB gain reduction, Attack-AUTO, Release-16
Residual Output Noise = typically -90dBu, -100dBu A wtg.
No gain reduction, 0dB output gain makeup, 150R input source impedance.
Channel to Channel Crosstalk = below noise.
150R source Z on measured CH-A, +20dBu applied to CH-B, 100Hz to 10kHz.
Standard Operating Level = +4dBu = 0 VU meter display.
Other sensitivities can be supplied from the factory.
Power Requirements = 230 or 115 Volts (selectable on rear).
Package = 2U rack mount, 482W x 44.5H x 250D (mm).
Weight = 7kgs.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
SOC 1.1 USERS MANUAL VERSION-4 PAGE 9