User guide

11
Internal Adjustments continued…
Locating the “VU CAL” and “METER ZERO” trimpots on the Meter board directly behind the
front panel control board.
These are the only trims that may need adjustment from time to time. All other trims are
factory set to match the LDR modules installed and do not need routine alignment.
• PLEASE do not adjust any other internal trimpots unless you have a copy of
the Buzz Audio SOC 1.1 Audio Alignment Instructions and are confident in
your ability to correctly set up the device. To obtain these instructions
please contact your dealer or Buzz Audio.
SOC 1.1 USERS MANUAL VERSION-4 PAGE 11