User's Guide
2.
NOTES BEFORE INSTALLATION
1. Allow unit to rest upright in the correct
position for 1 hour before unboxing.
3. Position unit in a well ventilated area and
ensure you allow a minimum of 2 inches
clear area around the unit.
4. Do not rest any objects on the top
or sides of the unit
5. The fridge requires a 110V US type
power outlet.
6. After turning the fridge on allow it to reach
pre-programmed temperature (0°C/32°F)
(3 LEDs on) over a 12 hour period.
7. After this initial period (minimum 12 hours)
the fridge setting can be changed to achieve
below zero temperatures by illuminating all 5
LEDS’s (-1.5°C/-3.0°C) or (29°F/26°F)
8. To ensure the unit can reach below zero
temperatures efciently, please load with
cold beer as opposed to room temperature
product where possible.
9. It is normal for the sides of the fridge to be
warm at times during operation.
UNBOXING YOUR Bud-e FRIDGE
Move packaged unit to approximate position of installation and allow unit to rest upright
in the correct position for 1 hour before unboxing.
1. 2.
Cut the straps and slide the
complete cardboard outer upward
and off the fridge. Remove the
fridge from the packaging base.
Place the fridge in position
on a level surface near a
110V power outlet.
Remove any plastic coverings
from the fridge
Cut