User's Manual

Installation Limitations
• Do not install your refrigerator in any location not properly insulated or heated, e.g. garage, etc.
Your refrigerator was not designed to operate in temperature settings below 55˚ Fahrenheit / 12˚
Celsius.
• Select a suitable location for the refrigerator on a hard even surface away from direct sunlight or
heat source, e.g. radiators, baseboard heaters, cooking appliances, etc. Any floor unevenness should
be corrected with the leveling legs located on the front bottom corners of the refrigerator.
In addition to the sounds from the amplified speaker, normal operating sounds you may hear
• Boiling water, gurgling sounds or slight vibrations are the result of the refrigerant circulating
through the cooling coils.
• The thermostat control will click when it cycles on and off.
Proper Refrigerator Care and Cleaning
Cleaning and Maintenance
Warning: To avoid electric shock, always unplug your
refrigerator before cleaning. Ignoring this warning may result in death or injury.
Caution: Before using cleaning products, always read and follow manufacturer’s instructions and
warnings to avoid personal injury or product damage.
General: Wipe down your refrigerator with a damp cloth, do not expose the internals to any
liquids.
• Dry with a soft cloth.
• Do not use harsh chemicals, abrasives, ammonia, chlorine bleach, concentrated detergents,
solvents or metal scouring pads. Some of these chemicals may dissolve, damage and/ or discolour
your refrigerator.
Door Gaskets: Clean door gaskets every three months according to general instructions. Gaskets
must be kept clean and pliable to ensure a proper seal.
• Petroleum jelly applied lightly on the hinge side of gaskets will keep the gasket pliable and ensure a
good seal.