Installation Guide
Installation Preparation
BV-RH801 USER MANUAL
NOTE: To avoid damage to your hood, prevent debris from entering the vent opening.
CAUTION: If moving the cooking range is necessary to install the hood, unplug the power on an electric range. SHUT OFF THE GAS VALVE
BEFORE MOVING A GAS RANGE.
1. Please unpack the range hood and accessories carefully.
2. Remove the bafe lters.
3. Check for any dent or damage inside and outside. If found any
loosing parts, please remove them.
4. Place the range hood on a at stable surface. Connect the range
hood to a designated standard outlet (120-Volt, 60Hz, AC only).
Press the power button and the speed buttons to turn on.
5. Check if any unusual metal touching noise, check the speed
variation, and press the Light button to check the lights. Verify all
functions by referring to Section RANGE HOOD OPERATIONS. Refer
to Section TROUBLESHOOTING if any malfunction was found.
6. Place all supplied parts and required hardware on a at stable sur-
face and verify the existence of all supplied parts listed on Section
INCLUDED PARTS AND ACCESSORIES.
7. Carefully remove the white plastic protective lm from the range
hood if any. The white protective lm might not cover all stainless
steel area; it was removed prior for welding or packing.
STEPS TO FOLLOW
10