Installation Guide

Know Before Installation

BV-RH801 USER MANUAL

Research, plan and prepare the optional accessories and tools.

DUCT VENTING AND ACCESSORIES (NOT INCLUDED)

If for new installation or your old range hood doesn’t have exhaust duct, prepare to cut the openings through the bottom of the cabinet, wall,

or top cabinet to ceiling. And purchase the 6” metal duct (or 6” semi-rigid aluminum duct for easy connection). Refer to Section 5 VENTING

METHODS for detail.

Check the existing exhaust duct size. If not 6” round metal duct, try to get the converter / reducer / adapter / elbow as shown in the pictures.

DAMPER IS NOT INCLUDED.

Because the damper generates NOISE when the shutters are ipping, we DO NOT recommend installing the damper directly attached to the

top vent of the range hood. You can install the damper between ducts and close to the air outlet near roof or side wall. If the roof cap or side

wall cap already has a damper, don’t need to add the damper.

2 PEOPLE ARE REQUIRED FOR INSTALLATION

TOOLS NEEDED FOR INSTALLATION

Cutting tools (jig saw or reciprocating saw), screw drivers or power drill, level, utility knife, measuring tape, duct/foil tape, and pencil.

DAMPER

ELBOW

EXHAUST DUCT

CONVERTERREDUCER

ADAPTER

DAMPER

POWER DRILL

JIG SAW

SCREW DRIVERSRECIPROCATING SAW

DUCT/FOIL TAPE

LEVEL

MEASURING TAPEUTILITY KNIFE

PENCIL