User Manual

ManualsBrandsBVA Hydraulics ManualsEquipmentHD10018

Printed in Taiwan

Maximum Operating Pressure 10,000 PSI

Models HD1010, HD1012, HD3008 & HD3014 Models HD5506, HD5513, HD5520, HD7506,

HD7513, HD10006, HD10013 & HD10018

MODELS: HD1010, HD1012, HD3008, HD3014, HD5506, HD5513, HD5520,

HD7506, HD7513, HD10006, HD10013 & HD10018

HD1010-M0 rev 12/07

Double Acting Cylinders

Instruction Manual

SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153

Tel: 888-332-6419 * Fax: 816-891-6599

E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

! ADVERTENCIA

• Leer, comprender, y seguir las instrucciónes antes de utilizar el aparato.

• El manual de instrucciónes y la información de seguridad deben estar comunicado en lengua del operador

antes del uso.

• No seguir estas indicaciónes puede causar daños personales o materiales.

Summary of content (12 pages)

PAGE 1
HD1010-M0 rev 12/07 Double Acting Cylinders Instruction Manual MODELS: HD1010, HD1012, HD3008, HD3014, HD5506, HD5513, HD5520, HD7506, HD7513, HD10006, HD10013 & HD10018 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com ! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
PAGE 2
SAFETY and GENERAL INFORMATION PRODUCT DESCRIPTION Save these instructions. For your safety, read and understand the information contained within. The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use this product. Instructions and safety information shall be conveyed in the operator’s native language before use of this product is authorized.
PAGE 3
Saddle Ram Plunger Collar Thread Protecting Cap Safety Relief Valve Carrying Handle (for 55~100 ton model only) Return Oil Port, 3/8”-18NPTF (Female Coupler) Dust Cover Cylinder Housing Advance Oil Port , 3/8”-18NPTF (Female Coupler) Figure 1 - Typical Double-Acting Cylinder Components INSTALLATION BEFORE USE IMPORTANT! A double-acting cylinder must be powered by a pump with 4-way valve. Both couplers on the cylinder must be connected.
PAGE 4
! WARNING Failure to comply with the following warnings may result in personal injury as well as property damage. Do not pull, position or move cylinder setup by the hose. Use carrying handle or other means of safe transport. • Study, understand, and follow all instructions provided with and on this device before use. • The user must be a qualiﬁed operator familiar with the correct operation, maintenance, and use of cylinders. Do not handle pressurized hoses.
PAGE 5
OPERATION Storage Cylinders should be stored with ram plunger fully retracted in a dry, protected area, not exposed to corrosive vapor, dust or other harmful elements. When a cylinder has not been used for a period of 4 months, it should be connected to a pump and fully extended and then retracted a minimum of 5 times. This cycle will lubricate the cylinder wall, reducing the possibility of corrosion and damage thereof. Operate the hydraulic pump to advance and retract the cylinder.
PAGE 6
TROUBLESHOOTING GUIDE The following information is intended as an aid in determining if problem exists. Cylinders should be repaired only by authorized BVA Service Center. For repair service, contact service center in your area. Symptom Possible Causes Corrective Action Erratic action • Air in system or pump cavitation. • External leakage in cylinder. • Cylinder sticking or binding. • Vent the system (refer to ﬁgure 2). • Contact service center. • Contact service center.
PAGE 7
LIMITED LIFETIME WARRANTY BVA Hydraulics®, represented in the United States by SFA Companies [“SFA”] warrants this product to be free from defects in material and workmanship for the life of the product as long as the original purchaser owns the product.
PAGE 8
Double Acting Cylinders Service Parts MODELS: HD1010, HD1012, HD3008 & HD3014 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. HD1010-M0 rev 12/07 Parts Illustration 1 1.
PAGE 9
Double Acting Cylinders Service Parts MODELS: HD1010, HD1012, HD3008 & HD3014 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. HD1010-M0 rev 12/07 Parts List Item 1 Part No. for Model: HD1010 & HD1012 HD3008 & HD3014 SD10 SD25 1.
PAGE 10
Double Acting Cylinder Service Parts MODEL: HD5520 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
PAGE 11
Double Acting Cylinders Service Parts MODELS: HD5506, HD5513, HD7506, HD7513, HD10006, HD10013 & HD10018 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
PAGE 12
Double Acting Cylinders Service Parts MODELS: HD5506, HD5513, HD5520, HD7506, HD7513, HD10006, HD10013 & HD10018 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 * Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the cylinder are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. HD1010-M0 rev 12/07 Parts List Item Part No.