User Manual
ImpactXtreme Operator’s Manual 8 March 2013
Activate/Deactivate the Detector
Activate the Detector
1.
Activate: Press and hold for 2 seconds. The start-up sequence begins.
Deactivate the Detector
1.
Deactivate: Press and hold for 3 seconds.
a)
If Detector Shutdown Passcode is enabled, the detector prompts for a passcode before
powering off. If the passcode is incorrect, or if a passcode is not entered, the detector
will not deactivate. For more information, see User Options and Settings.
2.
The Powering Off progress bar is displayed.
3.
LEDs flash red and the detector beeps once to indicate deactivation.
Start-up Sequence
1.
When the detector is activated, audible, visual and vibrating features are tested. Verify that
the LCD activates. Ensure that the detector beeps, flashes and vibrates, and that the LCD
backlight is activated.
2.
Product identification screens appear.
3.
The detector performs series of diagnostic tests. When all tests are complete, the results are
displayed.