User Manual

ImpactXtreme Operator’s Manual 8 March 2013
ImpactXtreme stores up to 2 setting profiles per detector. To set the default profile for a
detector, select a profile name from the drop-down menu. To change a profile name, select Edit
and enter a new name in the Change To field. Maximum 16 characters.
Use the Settings menu on the detector to load a stored profile.
Operators Name/Default
ImpactXtreme stores up to 10 operator names per detector. To set the default operator name for
a detector, select an operator name from the drop-down menu. To change an operator name,
select Edit and enter a new name in the Change To field. Maximum 12 characters.
Use the Settings menu on the detector to load a stored operator name.
Locations/Default
ImpactXtreme stores up to 49 locations per detector. To set the default location for a detector,
select a location from the drop-down menu. To change a location description, select Edit and
enter a new description in the Change To field. Maximum 12 characters.
Use the Settings menu on the detector to load a stored location.
Language
To change the default display language for a detector, select one of these options from the drop-
down menu:
1. English (factory default)
2. French
3. German
4. Italian
5. Spanish
6. Dutch
7. Portuguese
Confidence Beep Interval (seconds)
To change the time interval between confidence beeps (in seconds) for a detector, enter a value
from 5 to 255.
Backlight Timeout (seconds)
By default, the detector backlight deactivates after 10 seconds. To change the timeout interval
(in seconds) for the backlight, enter a value from 10 to 255.
Datalog Interval (seconds)
By default, the detector records a datalog entry once every 15 seconds. To change the datalog
recording interval (in seconds), enter a value from 1 to 600.
When memory is full, the detector replaces the oldest datalogs with the most recent datalogs.
Log Threshold (%FS)