User Manual

ImpactXtreme Operator’s Manual 8 March 2013
Show Time on Review Mode
Message Configuration
Messages

Please provide more information on the messages & responses options – how will they
work? Can a user access them from a detector menu or button? Can you provide an
example of use?
ImpactXtreme stores up to 10 messages per detector. To edit the text of a stored message, select
the message from the drop-down menu. Then, select Edit and enter a new message in the
Change To field. Maximum 20 characters.
Use the Settings menu on the detector to load a stored message.
Responses
ImpactXtreme stores up to 10 responses per detector. To edit the text of a stored response,
select the message from the drop-down menu. Then, select Edit and enter a new message in the
Change To field. Maximum 20 characters.
Use the Settings menu on the detector to load a stored response.
Startup Message
Select Enable Startup Message to display a custom message during detector start-up. Enter a
message in the Startup Message field. Maximum 25 characters.
Configuration Password
Select Enable User Configuration Password to prompt detector users to enter a password each
time a configuration change is made. This will help prevent unauthorized configuration changes.
Select Enable Detector Shutdown Password to prompt detector users to enter a password each
time the detector is deactivated. This will help prevent unauthorized deactivation.
Set a 4-digit password.
Sensor and Profile Configuration