User Manual

ImpactXtreme Operator’s Manual 8 March 2013
Visual Alarm

Red light-emitting diodes (LEDs) and red LCD backlight for gas alarms and critical system
faults.

Yellow light-emitting diodes (LEDs) and yellow LCD backlight for warnings and faults.
Confidence/compliance beep

Audible beep from variable pulsed beeper. Beep frequency is user-defined with
confidence/ compliance beep interval option.
Display
Alphanumeric liquid crystal display (LCD).
Backlight

Activates on startup and deactivates when start-up sequence is complete.

Activates when the pushbutton is pressed and deactivates after 10 seconds.

Activates during a gas alarm, warning, and fault conditions and remains lit until the
alarm, warning, or fault ends.
Internal Vibrator

Vibrates during all gas alarms, warnings, and faults.
Self-test

Initiated during activation.

Runs continuously on the battery, electrochemical sensors (PH3, H
2
S, SO
2
and CO),
combustible sensors (catalytic bead and IR sensor), PID sensor and monitor memory
while detector is activated.
Calibration

Zero and automatic span.
User Options

Startup message, lockout on self-test error, safe mode, IntelliFlash,
confidence/compliance beep, latching alarms, force calibration, force bump, stealth
mode, datalog interval, IntelliFlash interval, confidence/compliance beep interval,
profile selection, location tag, operator name, log threshold, unit of temperature,
configuration password, message configuration, backlight colorm sixth channel
configuration, and language selection.
Sensor Options