User's Manual
Table Of Contents
- Introduction
- Contacting BW Technologies
- Safety Information - Read First
- Getting Started
- The Personnel Alert Base Station
- Installation
- MODBUS Wiring and Configuration
- Baud Rate and Parity Configuration
- Setting the Dip Switch Addresses
- Alarm Relay Contact Wiring and Configuration
- Wiring DC Power
- Testing Manual Alarms
- Radio Frequency (RF) Optimization
- Setting the Badge ID
- Area System Planning
- Alarms (TBD)
- Maintenance
- Troubleshooting (TBD)
- Replacement Parts and Accessories
- Specifications
Personnel Alert: Base Station
Introduction
a Warning
To ensure your personal safety, read the
“Safety Information” before you use the
system.
The Personnel Alert Base Station (“the base station”) is a
wireless alarm notification system that transmits an alarm
condition from a fixed gas detection system, such as BW
Technologies’ GasPoint, to one or more (up to 256) portable
alarm modules (“the badge”).
The Personnel Alert is an area safety device. It is your
responsibility to respond properly to the alarm.
CAUTION: FOR SAFETY REASONS, THIS EQUIPMENT
MUST BE OPERATED AND SERVICED BY QUALIFIED
PERSONNEL ONLY. READ AND UNDERSTAND THE
USER MANUAL COMPLETELY BEFORE OPERATING OR
SERVICING.
1