Instructions / Assembly

SPECIFICATION
MAINTENANCE
Application:
Operation with unpressurized storage heaters is not possible.
Use for indoor public places and common residence.
Function:
Check connections for leaks and check function of fitting.
Maintenance:
Inspect and clean all components and replace if necessary. Shut off
water supply for maintenance work.
Note:
When installing the cartridge, ensure that the seals are correctly
seated. Tighten the screw evenly and alternately.
CAUTION:
Always turn water OFF before removing existing or disassembling
the faucet. Open faucet handle to relieve water presseure and insure that complete
water shut-off has been accomplished.
1. Use rinsing water and soft cloth, clean bilge and bilge membrane on the
surfaceto the best of the abilities.
3. After cleaning, rinse to flush cleanser off and dry with soft cloth.
4. Carefully dismantle the aerator regularly, rinse under clean water until loose
debris is cleared. (Except the waterfall faucet)
2. Cleaned the residue with the following cleansers only.
Soft liquid cleanser.
Colorless glass cleanser, totally soluble powder cleanser without abrasive
capability. (Mixed by instructions)
Never use cleanser, emery cloth or handkerchief which can rub.
Never use cleanser containg abrasive cleansers, ammonia , bleach, acids,
waxes, alcohol, solvents or other products not recommended for chrome.
Never use silicone gel containg acetic acid.
To keep the surface clean and bright, please clean the faucet regularly.
please abide by the following procedures.
If static pressure exceeds 0.5MPa, a pressure-reducing valve must be fitted.
Avoid major pressure differences between hot and cold water supply
Specications:
Minimum Flow Pressure:
Recommended Flow Pressure:
Operating Pressure:
Test Pressure:
Maximum Hot Water:
Recommended Hot Water:
Environment Temprature:
0.05MPa
0.4MPa
0.1~1.0MPa
1.6MPa
90°C/194°F
60°C
30°C-60°C/86°F-140°F